Sanyo PLC-XTC50AL owner manual Model No.. of your projector, Replacement Lamp Type No

Page 66

Maintenance and Care

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer.

●

Model No.. of your projector

:

PLC-XTC50AL

●

Replacement Lamp Type No.

:

POA-LMP125(Service Parts No. 610 342 2626)

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP 1/2 REPLACE indicators lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP 1/2 REPLACE indicators lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES,THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN..

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

66

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Model PLC-XTC50AL Features and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorAC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Part Names and Functions FrontBack Audio 3 Jacks LMONO/R Side TerminalAudio 2 Jack BNC Input Jacks0USB Connector Series B 1R/C JackTop Control Remote Control 5D..ZOOM button 4P-TIMER button9RESET/ON/ALL-OFF switch 6ZOOM ed buttonsRemote Control Battery Installation Wired Remote ControlRemote Control Code Installation Adjustable FeetLens Installation Removing the lensAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB Cables used for connection VGAConnecting for Audio Signal Monitor OUT and Audio OUT SpecificationsConnecting the AC Power Cord Projector side AC outlet sideTurning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Remote ControlOn-Screen Menu Menu Bar Lens Shift Adjustment Zoom AdjustmentFocus Adjustment Operating with Projector ControlSound Adjustment Direct OperationMenu Operation Operating with Remote Control Timer button Shutter buttonKeystone button Laser Pointer Function Pointer FunctionSpotlight Wireless Mouse Operation Presentation Pointer buttonInput Selection Remote Control OperationRemote Control button operation InputRGB PC analog RGB Scart RGB PC digital Input Source SelectionInput Menu Video ComponentComponent Video System SelectionVideo or S-video AV System Menu Video or S-videoSelecting Computer System Manually Computer AdjustmentComputer System Selection PC System MenuTo store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataImage Level Selection Image Level SelectionImage Menu Image Adjustment Image AdjustmentImage Adjust Menu Noise reduction SharpnessGamma ProgressiveTo reset the adjusted data, select Reset and press Screen Menu Screen AdjustmentScreen Adjustment KeystoneScreen Size Adjustment Computer Signals For zooming in and out the images Digital zoom +Digital zoom Screen Size Adjustment Video, Component Signals Setting Menu Language SettingSetting LogoCapture Logo PIN code lockChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code When selecting Lamp1/2 mode Lamp modeTimer setting Lamp control Lamp life controlPointer Display Standby modePower management DisplaySlant setting On startSlant Security Key lock and PIN code lock settings Key lockKey lock PIN code lock Change the PIN code lock settingChange the PIN code lock setting Enter a PIN codeChange the PIN code Change the PIN codeTest pattern Factory default Factory defaultMaintenance and Care Filter InstructionsReplacing the Filter Cartridge Filter counter Scroll counterAuto Lamp Selection System Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp Status DisplayLamp Replacement Replacement Lamp Type No POA-LMP125 Service Parts No 342Model No.. of your projector Then check the matters below Cleaning the Projection Lens Cleaning the Projector CabinetNo power TroubleshootingProblem AppendixTurning off power Auto PC adjustment functionDuring the operation Setting does not remain after Power management function doesWireless Mouse function does Remote Control doesWired remote control does not Indicator blinks or lightsSystem Menu TreeInput InformationSetting PC Adjust ScreenIndicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition ImmediatelyIf the Filter counter reached a time set in the timer Compatible Computer Specifications ON-SCREEN Resolution59.940 Technical Specifications Optional Parts PJ Link Notice Configurations of Terminals OutputTerminal D-sub 9 pin PIN Code Number Memo Logo PIN Code Lock NoDimensions KH7AM

PLC-XTC50AL specifications

The Sanyo PLC-XTC50AL is a leading-edge projector that has made a significant impact in the world of multimedia presentations and visual displays. Renowned for its robust performance, this projector is designed for a variety of settings, including business presentations, educational environments, and even larger auditoriums.

One of the defining features of the Sanyo PLC-XTC50AL is its high brightness level. With a brightness rating of 5000 ANSI lumens, it can deliver vibrant images even in well-lit environments, making it ideal for conference rooms where ambient light can be a challenge. This high brightness is complemented by a WXGA resolution of 1280 x 800 pixels, ensuring that images and text are sharp, clear, and easily readable from a distance.

Another significant advantage of the PLC-XTC50AL is its advanced color technology. The projector employs Sanyo’s proprietary Smooth Image technology to enhance color accuracy and richness. This feature, combined with the projector’s 3LCD system, ensures that colors are well-balanced and lifelike, providing audiences with a captivating viewing experience.

In terms of connectivity, the Sanyo PLC-XTC50AL doesn't disappoint. It offers multiple input options, including HDMI, VGA, and component video, making it versatile for connecting a variety of devices such as laptops, DVD players, and even gaming consoles. This flexibility is crucial for users who often switch between different media sources during their presentations.

The projector is also engineered for user convenience and maintenance. It features an easy-access lamp compartment that allows for quick bulb replacements, which helps minimize downtime during crucial presentations. Additionally, the projector has a long lamp life, reaching up to 4000 hours in standard mode, significantly reducing operational costs over time.

Moreover, the PLC-XTC50AL is designed with portability in mind, featuring a compact enclosure and lightweight design that makes it easy to transport between locations. It also incorporates features like digital keystone correction, which helps adjust the image up to a certain angle, preventing distortion and ensuring a perfectly squared image regardless of the projector’s position.

For organizations and individuals looking for a reliable, high-performance projector, the Sanyo PLC-XTC50AL stands out as a compelling choice, blending impressive specifications with user-friendly features tailored to meet the demands of dynamic presentation environments.
Top Page Image Contents