Sanyo PLC-XTC50AL owner manual To reset the adjusted data, select Reset and press

Image Adjustment

	Reset
To reset the adjusted data, select Reset and press the			Image Level Menu
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.			Move the red frame
			pointer to an image
	Store		item to be set and
			then press the
			SELECT button.
To store the adjusted data, select Store and press the		Store icon
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Level Selection on page 41.
	Quit
				A confirmation box
Exit the Image Adjust Menu.				appears and then
				select [Yes].

44