Sanyo PLC-XTC50AL owner manual Slant setting, On start

Page 56

Setting

Select one of the following options:

Ready

When the lamp has been fully cooled

 

down, the POWER indicator changes to fast

 

blinking. In this condition, the projection

 

lamp can be turned on if the input signal

 

is reconnected or any button on the top

 

control or remote control is pressed.

Shut down

When the lamp has been fully cooled down,

 

the power will be turned off.

Off

Power management function is off.

Note:

• Factory default is “Ready: 5 min.”

On start

When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.

Note:

Be sure to turn off the projector properly (see “Turning Off the Projector” on page 25). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

The On start function may not operate if you unplug the AC power cord and connect it immediately.

Power management

Press the SELECT button at Power management and this dialog box appears. Use the Point 7 8 buttons to choose one of the three options.

Press the Point d button to select the timer, and then use the Point 7 8 buttons to set timer.

Slant

This function is used to set the cooling fans’ operation to the projector’s setting environment. Set this function properly in accordance with the projector’s installation method. Otherwise, the cooling fans will not work properly and that causes malfunctions of the projector and decreases the lamp life.

Select the projector’s installation condition from the following options:

Off .....When using the projector within the range of the upward/

downward inclination of ±70º and +110º~ +180º, -110º~ -180º to the horizontal plane.

L1 ......When using the projector within the range of the upward/

downward inclination of +70º~+110º to the horizontal plane.

L2 ......When using the projector within the range of the upward/

downward inclination of -70º~ -110ºto the horizontal plane.

L3 ......When using the projector within the range of the upward/

downward inclination of ±70º to the horizontal plane and the ceiling function is set to “On”.

L4 ......When using the projector within the range of the upward/

downward inclination of +110º~+180º, -110º~ -180º to the horizontal plane and the ceiling function is set to “Off”.

Slant setting

+70°

UP

+0°UP -0°

UP

-70°

UP

L1

L2

UP

+110°

“L4” at Ceiling “Off”

UP

“Off” at Ceiling “On”

 

 

+180°

UP

 

 

-180°

UP

“L3” at Ceiling “On”

 

“Off” at Ceiling “Off”

-110°

 

56

Image 56
Contents Model PLC-XTC50AL Features and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Back Part Names and FunctionsFront Side Terminal Audio 2 JackAudio 3 Jacks LMONO/R BNC Input Jacks0USB Connector Series B 1R/C JackTop Control Remote Control 4P-TIMER button 9RESET/ON/ALL-OFF switch5D..ZOOM button 6ZOOM ed buttonsRemote Control Battery Installation Wired Remote ControlRemote Control Code Installation Adjustable FeetAttaching the lens to the projector Lens InstallationRemoving the lens Connecting to a Computer Digital and Analog RGB Cables used for connection VGAConnecting for Audio Signal Monitor OUT and Audio OUT SpecificationsConnecting the AC Power Cord Projector side AC outlet sideWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Zoom Adjustment Focus AdjustmentLens Shift Adjustment Operating with Projector ControlMenu Operation Sound AdjustmentDirect Operation Operating with Remote Control Keystone button Timer buttonShutter button Spotlight Laser Pointer FunctionPointer Function Wireless Mouse Operation Presentation Pointer buttonRemote Control Operation Remote Control button operationInput Selection InputInput Source Selection Input MenuRGB PC analog RGB Scart RGB PC digital Video ComponentVideo System Selection Video or S-videoComponent AV System Menu Video or S-videoComputer Adjustment Computer System SelectionSelecting Computer System Manually PC System MenuAuto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataImage Menu Image Level SelectionImage Level Selection Image Adjust Menu Image AdjustmentImage Adjustment Sharpness GammaNoise reduction ProgressiveTo reset the adjusted data, select Reset and press Screen Adjustment Screen AdjustmentScreen Menu KeystoneScreen Size Adjustment Computer Signals Digital zoom For zooming in and out the imagesDigital zoom + Screen Size Adjustment Video, Component Signals Setting SettingSetting Menu Language LogoCapture Logo PIN code lockChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Timer setting When selecting Lamp1/2 modeLamp mode Lamp control Lamp life controlPointer Standby mode Power managementDisplay DisplaySlant Slant settingOn start Key lock Security Key lock and PIN code lock settingsKey lock Change the PIN code lock setting Change the PIN code lock settingPIN code lock Enter a PIN codeTest pattern Change the PIN codeChange the PIN code Factory default Factory defaultMaintenance and Care Filter InstructionsReplacing the Filter Cartridge Filter counter Scroll counterLamp 1/2 Replace Indicators Lamp Mode ChangeoverAuto Lamp Selection System Lamp Status DisplayLamp Replacement Model No.. of your projector Replacement Lamp Type NoPOA-LMP125 Service Parts No 342 Then check the matters below Cleaning the Projection Lens Cleaning the Projector CabinetTroubleshooting ProblemNo power AppendixAuto PC adjustment function During the operation Setting does not remain afterTurning off power Power management function doesRemote Control does Wired remote control does notWireless Mouse function does Indicator blinks or lightsMenu Tree InputSystem InformationSetting PC Adjust ScreenIndicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition ImmediatelyIf the Filter counter reached a time set in the timer Compatible Computer Specifications ON-SCREEN Resolution59.940 Technical Specifications Optional Parts PJ Link Notice Terminal D-sub 9 pin Configurations of TerminalsOutput PIN Code Number Memo Logo PIN Code Lock NoDimensions KH7AM

PLC-XTC50AL specifications

The Sanyo PLC-XTC50AL is a leading-edge projector that has made a significant impact in the world of multimedia presentations and visual displays. Renowned for its robust performance, this projector is designed for a variety of settings, including business presentations, educational environments, and even larger auditoriums.

One of the defining features of the Sanyo PLC-XTC50AL is its high brightness level. With a brightness rating of 5000 ANSI lumens, it can deliver vibrant images even in well-lit environments, making it ideal for conference rooms where ambient light can be a challenge. This high brightness is complemented by a WXGA resolution of 1280 x 800 pixels, ensuring that images and text are sharp, clear, and easily readable from a distance.

Another significant advantage of the PLC-XTC50AL is its advanced color technology. The projector employs Sanyo’s proprietary Smooth Image technology to enhance color accuracy and richness. This feature, combined with the projector’s 3LCD system, ensures that colors are well-balanced and lifelike, providing audiences with a captivating viewing experience.

In terms of connectivity, the Sanyo PLC-XTC50AL doesn't disappoint. It offers multiple input options, including HDMI, VGA, and component video, making it versatile for connecting a variety of devices such as laptops, DVD players, and even gaming consoles. This flexibility is crucial for users who often switch between different media sources during their presentations.

The projector is also engineered for user convenience and maintenance. It features an easy-access lamp compartment that allows for quick bulb replacements, which helps minimize downtime during crucial presentations. Additionally, the projector has a long lamp life, reaching up to 4000 hours in standard mode, significantly reducing operational costs over time.

Moreover, the PLC-XTC50AL is designed with portability in mind, featuring a compact enclosure and lightweight design that makes it easy to transport between locations. It also incorporates features like digital keystone correction, which helps adjust the image up to a certain angle, preventing distortion and ensuring a perfectly squared image regardless of the projector’s position.

For organizations and individuals looking for a reliable, high-performance projector, the Sanyo PLC-XTC50AL stands out as a compelling choice, blending impressive specifications with user-friendly features tailored to meet the demands of dynamic presentation environments.