Sanyo PLC-XTC50AL Installing the Projector in Proper Directions, Positioning Precautions

Page 7

Safety Instructions

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.

This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.

Note:

• To inverse or reverse the image, set the ceiling function to “On.” (p. 45)

Positioning Precautions

Avoid positioning the projector as described below when installing.

10˚

10˚

Do not tilt the projector more than

 

 

10 degrees from side to side.

 

 

 

 

 

10˚

 

Do not put the projector on either side to project an image.

10˚

In upward projection, do not tilt the projector over 10 degrees right and left.

In downward projection, do not tilt the projector over 10 degrees right and left.

10˚

10˚

CAUTION ON CEILING MOUNTING

For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non- recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

7

Image 7
Contents Model PLC-XTC50AL Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Top Control Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorAC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Front Part Names and FunctionsBack BNC Input Jacks Side TerminalAudio 2 Jack Audio 3 Jacks LMONO/R1R/C Jack 0USB Connector Series BTop Control Remote Control 6ZOOM ed buttons 4P-TIMER button9RESET/ON/ALL-OFF switch 5D..ZOOM buttonWired Remote Control Remote Control Battery InstallationRemote Control Code Adjustable Feet InstallationRemoving the lens Lens InstallationAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB VGA Cables used for connectionMonitor OUT and Audio OUT Specifications Connecting for Audio SignalProjector side AC outlet side Connecting the AC Power CordEnter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector Remote Control How to Operate the On-Screen MenuOn-Screen Menu Menu Bar Operating with Projector Control Zoom AdjustmentFocus Adjustment Lens Shift AdjustmentDirect Operation Sound AdjustmentMenu Operation Operating with Remote Control Shutter button Timer buttonKeystone button Pointer Function Laser Pointer FunctionSpotlight Presentation Pointer button Wireless Mouse OperationInput Remote Control OperationRemote Control button operation Input SelectionVideo Component Input Source SelectionInput Menu RGB PC analog RGB Scart RGB PC digitalAV System Menu Video or S-video Video System SelectionVideo or S-video ComponentPC System Menu Computer AdjustmentComputer System Selection Selecting Computer System ManuallyAuto PC Adj Auto PC AdjustmentPC Adjust Menu To store adjustment parametersManual PC Adjustment To store the adjusted data To clear the adjusted dataImage Level Selection Image Level SelectionImage Menu Image Adjustment Image AdjustmentImage Adjust Menu Progressive SharpnessGamma Noise reductionTo reset the adjusted data, select Reset and press Keystone Screen AdjustmentScreen Adjustment Screen MenuScreen Size Adjustment Computer Signals Digital zoom + For zooming in and out the imagesDigital zoom Screen Size Adjustment Video, Component Signals Logo SettingSetting Setting Menu LanguageLogo PIN code lock CaptureEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Lamp mode When selecting Lamp1/2 modeTimer setting Lamp life control Lamp controlPointer Display Standby modePower management DisplayOn start Slant settingSlant Key lock Security Key lock and PIN code lock settingsKey lock Enter a PIN code Change the PIN code lock settingChange the PIN code lock setting PIN code lockChange the PIN code Change the PIN codeTest pattern Factory default Factory defaultFilter Instructions Maintenance and CareReplacing the Filter Cartridge Scroll counter Filter counterLamp Status Display Lamp 1/2 Replace IndicatorsLamp Mode Changeover Auto Lamp Selection SystemLamp Replacement POA-LMP125 Service Parts No 342 Replacement Lamp Type NoModel No.. of your projector Then check the matters below Cleaning the Projector Cabinet Cleaning the Projection LensAppendix TroubleshootingProblem No powerPower management function does Auto PC adjustment functionDuring the operation Setting does not remain after Turning off powerIndicator blinks or lights Remote Control doesWired remote control does not Wireless Mouse function doesInformation Menu TreeInput SystemPC Adjust Screen SettingProjector is operating normally Indicators and Projector ConditionImmediately Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer ON-SCREEN Resolution Compatible Computer Specifications59.940 Technical Specifications Optional Parts PJ Link Notice Output Configurations of TerminalsTerminal D-sub 9 pin Logo PIN Code Lock No PIN Code Number MemoDimensions KH7AM

PLC-XTC50AL specifications

The Sanyo PLC-XTC50AL is a leading-edge projector that has made a significant impact in the world of multimedia presentations and visual displays. Renowned for its robust performance, this projector is designed for a variety of settings, including business presentations, educational environments, and even larger auditoriums.

One of the defining features of the Sanyo PLC-XTC50AL is its high brightness level. With a brightness rating of 5000 ANSI lumens, it can deliver vibrant images even in well-lit environments, making it ideal for conference rooms where ambient light can be a challenge. This high brightness is complemented by a WXGA resolution of 1280 x 800 pixels, ensuring that images and text are sharp, clear, and easily readable from a distance.

Another significant advantage of the PLC-XTC50AL is its advanced color technology. The projector employs Sanyo’s proprietary Smooth Image technology to enhance color accuracy and richness. This feature, combined with the projector’s 3LCD system, ensures that colors are well-balanced and lifelike, providing audiences with a captivating viewing experience.

In terms of connectivity, the Sanyo PLC-XTC50AL doesn't disappoint. It offers multiple input options, including HDMI, VGA, and component video, making it versatile for connecting a variety of devices such as laptops, DVD players, and even gaming consoles. This flexibility is crucial for users who often switch between different media sources during their presentations.

The projector is also engineered for user convenience and maintenance. It features an easy-access lamp compartment that allows for quick bulb replacements, which helps minimize downtime during crucial presentations. Additionally, the projector has a long lamp life, reaching up to 4000 hours in standard mode, significantly reducing operational costs over time.

Moreover, the PLC-XTC50AL is designed with portability in mind, featuring a compact enclosure and lightweight design that makes it easy to transport between locations. It also incorporates features like digital keystone correction, which helps adjust the image up to a certain angle, preventing distortion and ensuring a perfectly squared image regardless of the projector’s position.

For organizations and individuals looking for a reliable, high-performance projector, the Sanyo PLC-XTC50AL stands out as a compelling choice, blending impressive specifications with user-friendly features tailored to meet the demands of dynamic presentation environments.