Sanyo PLC-XTC50AL Capture function does not work, Remote Control does, Work to the projector on

Page 71

Appendix

Capture function does not work.

– Check the connection and the Input signal to see if there is signal.

The Remote Control does

– Check the batteries.

not work..

– Make sure no obstruction is between the projector and remote control.

 

– Make sure you are not too far from the projector when using the

 

remote control. Maximum operating range is 16.4’ (5 m).

 

– Make sure that the remote control code conforms to the projector’s

 

code. See page 54.

 

– Unlock the Key lock function for the remote control. See page 57.

 

– Wireless remote control does not work when the remote control cable

 

is connected to the projector.

The wired remote control does not

– When the standby mode is set to "ECO", the same remote control code

work to the projector on..

should be set on both the projector and the remote control to turn the

 

projector on.

Wireless Mouse function does

– Check the connection between the projector and your computer.

not work..

– Check the mouse setting on your computer.

 

– Turn on the projector before you turn on the computer.

 

– Make sure the computer input is selected.

 

– Make sure that the mouse driver is installed in your computer. To use the

 

moue as a wireless mouse, the mouse driver needs to be installed in

 

the computer.

Indicator blinks or lights..

– Check the status of the projector with referring to "Indicators and

 

Projector Condition." See pages 74-76.

The exclamation mark appears

– Your operation is invalid. Operate correctly.

on the screen..

 

The top control does not work..

– Unlock Key lock for the projector in the Key lock function.

Unable to unlock the Logo PIN

– Contact the dealer where you purchased the projector or the service

code lock, Security key lock

center.

or Security PIN code lock..

 

WARNING :

High voltages are used to operate this projector.. Do not attempt to open the cabinet..

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

The CE Mark is a Directive conformity mark of the European Community (EC).

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

Pixelworks ICs used.

71

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Model PLC-XTC50AL Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Top Control Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Back Part Names and FunctionsFront BNC Input Jacks Side TerminalAudio 2 Jack Audio 3 Jacks LMONO/R1R/C Jack 0USB Connector Series BTop Control Remote Control 6ZOOM ed buttons 4P-TIMER button9RESET/ON/ALL-OFF switch 5D..ZOOM buttonWired Remote Control Remote Control Battery InstallationRemote Control Code Adjustable Feet InstallationAttaching the lens to the projector Lens InstallationRemoving the lens Connecting to a Computer Digital and Analog RGB VGA Cables used for connectionMonitor OUT and Audio OUT Specifications Connecting for Audio SignalProjector side AC outlet side Connecting the AC Power CordEnter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Operating with Projector Control Zoom AdjustmentFocus Adjustment Lens Shift AdjustmentMenu Operation Sound AdjustmentDirect Operation Operating with Remote Control Keystone button Timer buttonShutter button Spotlight Laser Pointer FunctionPointer Function Presentation Pointer button Wireless Mouse OperationInput Remote Control OperationRemote Control button operation Input SelectionVideo Component Input Source SelectionInput Menu RGB PC analog RGB Scart RGB PC digitalAV System Menu Video or S-video Video System SelectionVideo or S-video ComponentPC System Menu Computer AdjustmentComputer System Selection Selecting Computer System ManuallyAuto PC Adj Auto PC AdjustmentPC Adjust Menu To store adjustment parametersManual PC Adjustment To store the adjusted data To clear the adjusted dataImage Menu Image Level SelectionImage Level Selection Image Adjust Menu Image AdjustmentImage Adjustment Progressive SharpnessGamma Noise reductionTo reset the adjusted data, select Reset and press Keystone Screen AdjustmentScreen Adjustment Screen MenuScreen Size Adjustment Computer Signals Digital zoom For zooming in and out the imagesDigital zoom + Screen Size Adjustment Video, Component Signals Logo SettingSetting Setting Menu LanguageLogo PIN code lock CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Timer setting When selecting Lamp1/2 modeLamp mode Lamp life control Lamp controlPointer Display Standby modePower management DisplaySlant Slant settingOn start Key lock Security Key lock and PIN code lock settingsKey lock Enter a PIN code Change the PIN code lock settingChange the PIN code lock setting PIN code lockTest pattern Change the PIN codeChange the PIN code Factory default Factory defaultFilter Instructions Maintenance and CareReplacing the Filter Cartridge Scroll counter Filter counterLamp Status Display Lamp 1/2 Replace IndicatorsLamp Mode Changeover Auto Lamp Selection SystemLamp Replacement Model No.. of your projector Replacement Lamp Type NoPOA-LMP125 Service Parts No 342 Then check the matters below Cleaning the Projector Cabinet Cleaning the Projection LensAppendix TroubleshootingProblem No powerPower management function does Auto PC adjustment functionDuring the operation Setting does not remain after Turning off powerIndicator blinks or lights Remote Control doesWired remote control does not Wireless Mouse function doesInformation Menu TreeInput SystemPC Adjust Screen SettingProjector is operating normally Indicators and Projector ConditionImmediately Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer ON-SCREEN Resolution Compatible Computer Specifications59.940 Technical Specifications Optional Parts PJ Link Notice Terminal D-sub 9 pin Configurations of TerminalsOutput Logo PIN Code Lock No PIN Code Number MemoDimensions KH7AM

PLC-XTC50AL specifications

The Sanyo PLC-XTC50AL is a leading-edge projector that has made a significant impact in the world of multimedia presentations and visual displays. Renowned for its robust performance, this projector is designed for a variety of settings, including business presentations, educational environments, and even larger auditoriums.

One of the defining features of the Sanyo PLC-XTC50AL is its high brightness level. With a brightness rating of 5000 ANSI lumens, it can deliver vibrant images even in well-lit environments, making it ideal for conference rooms where ambient light can be a challenge. This high brightness is complemented by a WXGA resolution of 1280 x 800 pixels, ensuring that images and text are sharp, clear, and easily readable from a distance.

Another significant advantage of the PLC-XTC50AL is its advanced color technology. The projector employs Sanyo’s proprietary Smooth Image technology to enhance color accuracy and richness. This feature, combined with the projector’s 3LCD system, ensures that colors are well-balanced and lifelike, providing audiences with a captivating viewing experience.

In terms of connectivity, the Sanyo PLC-XTC50AL doesn't disappoint. It offers multiple input options, including HDMI, VGA, and component video, making it versatile for connecting a variety of devices such as laptops, DVD players, and even gaming consoles. This flexibility is crucial for users who often switch between different media sources during their presentations.

The projector is also engineered for user convenience and maintenance. It features an easy-access lamp compartment that allows for quick bulb replacements, which helps minimize downtime during crucial presentations. Additionally, the projector has a long lamp life, reaching up to 4000 hours in standard mode, significantly reducing operational costs over time.

Moreover, the PLC-XTC50AL is designed with portability in mind, featuring a compact enclosure and lightweight design that makes it easy to transport between locations. It also incorporates features like digital keystone correction, which helps adjust the image up to a certain angle, preventing distortion and ensuring a perfectly squared image regardless of the projector’s position.

For organizations and individuals looking for a reliable, high-performance projector, the Sanyo PLC-XTC50AL stands out as a compelling choice, blending impressive specifications with user-friendly features tailored to meet the demands of dynamic presentation environments.
Top Page Image Contents