Sanyo PLC-XK2600 owner manual Installation, Connecting to a Computer, Cables used for connection

Installation

Connecting to a Computer

Cables used for connection

•VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.)

•Audio Cables

(*One cable is supplied; other cables are not supplied with the projector.)

Audio Output

Audio cable

Monitor Output

VGA cable

Monitor Input
or	Audio Output
Monitor Output
		When using AUDIO
		IN(PC/MIC) terminal
		as MIC input,
VGA		connect to this
		terminals for PC
cable		audio input.

External Audio Equipment

Audio Input

(stereo)

COMPUTER IN 1

/S-VIDEO IN /COMPONENT IN

	PC AUDIO
COMPUTER
IN 2 /	IN
MONITOR OUT

(MIC)-

This terminal is switchable. Set up the terminal as either Computer input or Monitor output. (See Page 49.)

AUDIO OUT (stereo)

Audio cable (stereo)

AUDIO IN (PC or MIC)

Note:

• When the MIC function is set to Off in the Sound menu, the MIC function is disabled.

•When MIC is set to On in Sound Menu, AUDIO IN (PC/MIC) and AUDIO IN(L/R) terminals can be connected at the same time. At this time, AUDIO IN (PC/MIC) termianl as MIC input, AUDIO IN(L/R) terminal is as COMPUTER or VIDEO audio input.

•Input sound to the AUDIO IN terminal when using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT IN and the COMPUTER IN 2/MONITOR OUT terminals as input.

•When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.

•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN/ COMPONENT IN and not the COMPUTER IN 2/MONITOR OUT.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

14