Safety Instructions
Air Circulation
Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.
–Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.
–Keep the exhaust vent at least 3’ (1 m) away from any objects.
–Do not touch a peripheral part of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.
–Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.
–Make sure that there is no object under the projector to prevent from covering the bottom openings.
Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.
Air Intake Vent (Filter)
Air Intake Vent
Exhaust Vent (Hot air exhaust)
Installing the Projector in Proper
Position
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
20° | Do not tilt the projector more than 20 | |
| degrees from side to side. | |
20° |
| |
30° | Do not tilt the projector more than 30 | |
degrees from above and below. | ||
| ||
30° |
| |
| Do not point the projector up to | |
| project an image. | |
| Do not point the projector down to | |
| project an image. | |
| Do not put the projector on either side | |
| to project an image. |
Moving the Projector
When moving the projector, retract the adjustable feet to prevent damage to the cabinet and use a suitable carrying case.
When this projector is not in use for an extended period, put it into a suitable case to protect the projector.
CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages or malfunctions may result.
–When carrying the projector, use a suitable carrying case.
–Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.
–Do not put the projector in a case before the projector is cooled enough.