Screen Size Adjustment

Computer Input

This projector has the picture screen resize function, which enables you to customize the image size.

1	Press the MENU button to display the On-Screen
1	Menu. Use the Point ▲▼ buttons to select Screen
	and then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons select the desired item
2	and then press the SELECT button .

Normal

Provide the image to fit the screen size.

Full

Provide the full screen image.

Wide (16:9)

Provide the image at the 16:9 wide screen ratio.

Zoom

Scale the image proportionally to fit the entire screen. Either side of image may go over the screen.

True

Provide the image in its original size. When the original image size is larger or smaller than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Custom

Provide the last stored aspect screen image.

Custom adj..

Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust.

Scale H/V	Adjust the Horizontal/Vertical screen
	scale.
H&V	When set to On, the aspect ratio is
	fixed. The Scale V appears dimmed
	and becomes unavailable. Adjust
	Scale H, then the screen scale is
	automatically modified based on the
Position H/V	aspect ratio.
Position H/V	Adjust the Horizontal/Vertical screen
Common	position.
Common	Save the adjusted scale or position
	to all the inputs. Press the SELECT
	button at Common to display a
	confirmation box. To save the scale or
	position, press the SELECT button at
	Yes. When Custom is selected, the
Reset	saved scale or position is used.
Reset	Reset the all adjusted values. Press
	the SELECT button at Reset to
	display a confirmation box. To reset,
	press the SELECT button at Yes.

Screen Menu

Note:

•This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

•The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

•True and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p,1035i or 1080i is selected in the PC System Menu (p. 28).

•When True is selected in the Screen menu, Digital zoom +/- can not be selected.

Custom adj..

Note:

•When no signal is detected, Normal is set automatically .

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.