Sanyo PLC-XK2600 owner manual Menu Bar

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 67-68.

Main Menu Sub-Menu

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

①Input

Used to select an input source from Computer 1, Computer 2 or Video (pp.27, 36-37).

②PC adjust

Select Auto PC adj., Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display area-

H and Display area-Vto adjust the parameters to match with the PC input signal format (pp.29-31).

③Image select

Used to select an image mode from among Dynamic, Standard, Real, Cinema, Blackboard(Green),

Colorboard and Image 1-4. (pp.32, 39)

④Image adjust

For computer source, used to adjust computer image [Contrast, Brightness, Iris, Color temp.., White balance (R/G/B), Sharpness, Gamma, Reset and Store] (p.33).

For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Iris, Color temp..,

White balance (R/G/B), Sharpness, Gamma, Noise reduction, Progressive, Reset and Store] (pp.40- 41).

⑤Screen

For computer source, used to adjust size of the image [ Normal, Full, Wide(16:9), Zoom, True, Custom, Custom adj., Digital zoom +/– , Keystone, Ceiling, Rear and Reset] (pp.34-35).

For Video source, used to set size of image [Normal, Full, Wide(16:9), Zoom, Custom, Custom adj.,

Keystone, Ceiling, Rear and Reset] (pp.42-43).

⑥Sound

Used to adjust the volume or mute the sound or set configurations to the MIC functions (p.24).

⑦Setting

Used to set the projector’s operating configurations (pp.44-56).

⑧Information

Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter , Power management, Key lock, PIN code lock, Remote control and SERIAL

NO... (p.57)

⑨Network

See owner’s manual of “Network Set-up and Operation”.

⑩Guide

The key operation is displayed.

22