Sanyo PLC-XK2600 owner manual Sound Adjustment

Page 24

Basic Operation

Sound Adjustment

Direct Operation

Top Control

Volume

Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.

VOLUME +/- buttons

Mute

Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE button again to select Off or press the VOLUME +/– buttons. The Mute function is also effective for the AUDIO OUT jack.

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound. Press the Point ► or the SELECT button to access the submenu items.

2 Use the Point ▲▼ buttons to select the desired submenu item and press the SELECT button to access the selected item.

Volume

Press the Point ► button to turn up the volume; Press the Point ◄ button to turn down the volume.

Mute

Press the SELECT button to switch the mute function On/ Off. When the sound is turned off, On is displayed. Press the VOLUME +/– buttons again or adjust MIC gain’s volume to turn the sound back on.

MIC

Use the Point ▲▼ buttons to switch the MIC function On/Off, and then press the SELECT button. When On is selected, the synthesis volume (MIC and RCA) is output.

Remote Control

VOLUME + button

MUTE button

VOLUME - button

Approximate level of

Volume Dialog Box the volume.

Press the MUTE button to set the Mute function On or Off. The dialog box disappears after 4 seconds.

Sound Menu

MIC gain

Press the Point ► button to turn up the MIC mixing gain; Press the Point ◄ button to turn down the MIC mixing gain.

Standby MIC out

When switch the Standby MIC out function On and in Standby mode status, only MIC volume can be output.

Note:

When Off is selected in MIC function, the MIC gain and Standby MIC out functions are not available.

Only the Standby mode is set to Network, Standby MIC out can be selected.

If the MIC function is turned on when connecting PC audio to the AUDIO IN (a mini jack), loud sound may be output suddenly depending on the setting value of MIC gain.

AUDIO INPUT SELECTION (see pages 14-15)

 

AUDIO IN

MIC Setup

RCA L/R terminal

Mini jack

MIC Off

Video audio input

PC audio input

MIC On

Video or PC audio input

MIC input

24

Image 24
Contents Model PLC-XK2200 PLC-XK2600 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Installing the Projector in Proper PositionAir Circulation Moving the ProjectorAC Power Cord Requirement AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom CompliancePart Names and Functions FrontBack BottomPart Names and Functions Rear Terminal⑤ LAN Connection Terminal Top Control Remote Control Remote Control Battery Installation Remote Control Operating RangeRemote Control Code Menu buttonInstallation Adjustable FootPositioning the Projector NoteInstallation Connecting to a ComputerCables used for connection Connecting to Video Equipment MICConnecting to Component Video and RGB Scart Equipment Connecting the AC Power Cord To power cord To the AC outlet Connector on yourProjector side AC outlet side For the U.KInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlWhat is PIN code? Basic OperationEnter a PIN code PIN Code Input Dialog BoxTurning Off the Projector Cooling fans keep running. You can selectHow to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Zoom and Focus Adjustment Auto Setup FunctionAuto Setup button Point buttons Keystone CorrectionSound Adjustment Remote Control Operation Timer button TimerNo Show button Image buttonRemote Control Computer 1 button Computer InputInput Source Selection RGB Computer 1/Computer Computer 2 buttonComputer Input Computer System SelectionAuto ModeAuto PC Adjustment PC adjust MenuTo store adjustment parameters Auto PC adjManual PC Adjustment Reset Mode freeStore Image Mode Selection Image Adjustment Screen Size Adjustment Digital zoom + Digital zoomKeystone CeilingVideo Input Input Source Selection Video, S-videoVideo button Video Video button S-video VideoVideo Input Input Source Selection Component, RGB Scart 21-pinInput Menu Component buttonVideo System Selection Video or S-video AutoComponent Auto AV System Menu Video or S-video AV System Menu ComponentDynamic Image Adjust Menu ColorTint Blackboard or ColorboardNoise reduction ProgressiveStore Menu Screen Menu Note Keystone Setting SettingSetting Menu LanguageSetting Auto setupLogo Logo and Logo PIN code lock settings BackgroundDisplay Logo selectCapture Logo PIN code lockChange the Logo PIN code lock setting Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code changeTerminal Direct onShut down Standby mode Stop or Cancel the P-timer via Remote ControlCount down 00000-18000 At Restart to resume Count up orClosed Caption To change the code for the remote control Code To change the code for the projectorSecurity Key lock and PIN code lock Key lockPIN code lock Key lockChange the PIN code lock setting Enter a PIN codeChange the PIN code Enter a PIN code Change the PIN codeVideo delay control Lamp counter resetFan Fan controlFactory default Filter counterOff/2000H/3000H/4000H Note Remote Control InformationInput Source Information Display Maintenance and Cleaning Projector is shut down and the Warning indicator lights redNote Then check the matters below Maintenance and Cleaning Resetting the Filter CounterFilter counter reset Replacing the FilterCleaning the Projection Lens Cleaning the Projector CabinetAttaching the Lens Cap Lamp Replacement Reset the lamp counterLamp Handling Precautions Troubleshooting AppendixAppendix Remote Control does Indicator blinks or lightsImage is distorted or runs off PIN code dialog box appearsAppendix Menu Tree Computer Input/Video InputVideo Input Computer InputIndicators and Projector Condition IndicatorsRed RedCompatible Computer Specifications DisplayTechnical Specifications Optional Parts PJ Link Notice Attaching the Filter Cover to the ProjectorConfigurations of Terminals Terminal Analog RGB Mini D-sub 15 pinTX + RX + Horiz. sync. Input/OutputPIN Code Lock No Logo PIN Code Lock NoPIN Code Number Memo Dimensions Unit mminchKS8AE