Sanyo PLC-XK2600 Auto PC Adjustment, Auto PC adj, PC adjust Menu, To store adjustment parameters

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Menu Operation

Auto PC adj.

1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select PC adjust and then press the Point ► or the SELECT button.

2	Use the Point ▲▼ buttons to select Auto PC adj.
	and then press the SELECT button.

To store adjustment parameters

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–10)in the PC System Menu (see page 28). See also “Store” on page 31.

Note:

•Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp. 30- 31).

•The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p. 28).

PC adjust Menu

Use Point ▲▼ buttons to select Auto

PC adj.. and press the SELECT button.

Please wait.... . appears while the Auto

PC adjustment is in process.

29