Sanyo PLC-XE33 owner manual Network PIN code

Page 14

Chapter 2 Setup Procedures

Network PIN code

The Network PIN code is to restrict the access from the networks to the projector.

After setting the Network PIN code, you need to enter it to operate the projector via the networks.

1.Select "Network PIN code" in the Network menu, and press SELECT button. The Network PIN code screen will appear.

2.Set the Network PIN code.

Set the figures with the Point ed buttons and move to the next items with the Point 7

8buttons. Select “Set” and press SELECT button to set. To cancel the preset Network PIN code, select “Cancel”. When you do not want to set the Network PIN code, set "0000".

It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. See “3. Basic setting and operation” ➔ “Initial setting” ➔ “Network PIN code setting” (p.23).

Network PIN code

Network PIN code screen

Network information

Select "Network information" in the Network menu and press Point 8 or SELECT button to show LAN setting environment of the currently selected projector. (The description below is an example and different from what will be shown.)

14

Image 14

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationAddress ComplianceFederal Communications Commission Notice Telephone No 818998-7322Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Install the Software on computersPreparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesSwitches PJLink password authentication on or off +p.23 Initial settingSets the Network PIN code to login the setting page +p.23 Password for PJLink function +p.23To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink?Sets Dhcp or Manual Network configurationDisplays the selected LAN mode Sets server name or IP address of the Smtp server Mail settingSetting Smtp server and administrator address AbnormalityUp to 10 E-mail addresses can be registered Check / Delete Registering and deleting E-mail addressesOption selection for sending alert mail OptionExamples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use timeSnmp setting Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Popup confirmation window Power control and status checkDisplays the status of the projectors power. Refer to next PJ statusAbout projector condition Status DescriptionControl InputSystem Item DescriptionSound Suppresses the sound. ON, OFFImage adjustment Image mode Video ComputerPC adjustment Screen mode Video Computer Normal True Wide Full Custom Setting up the projectorScreen setting Setting Normal mode Projector or Remote control. OFFProjector keys, Remote control Highland modeItems Description InformationIndication of the lamp status StatusChapter Appendix To another network Examples of connectionPeer-To-Peer connection Gateway Router installed in the network Entrance hallUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?What is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KR5AC