Sanyo PLC-XE33 owner manual Image adjustment, Image mode Video Computer

Control

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item	Description
Contrast		Adjusts picture con-
Brightness		trast (0~ 63)
		Adjusts picture bright-
Color		ness (0~ 63)
		Adjusts picture color
Tint		saturation (0~ 63)
		Adjusts picture hue
Color temp		(0~ 63)
		Sets a color temperature
		mode. {High, Mid, Low,
		XLow, User, Colorboard,
White Balance		Blackboard(Green)}
Red, Green, Blue		Adjusts each white
		balance respectively.
		(0~ 63)

*When changing the value of the white balance, the color temp. indicates "Adj."

Sharpness	Adjusts picture
	sharpness. (0~ 15)
Gamma	Adjusts brightness of darker part of the picture. (0~ 15)
Noise reduction	Switches noise reduction mode (OFF, L1, L2)
Progressive	Switches progressive mode (OFF, L1, L2, Film)
Reset	Resets the Image adjustment to previous levels.
Store	Stores the Image adjustment values. Select an item [Image1 - Image4] from
Load	the pull-down menu and click Store button.
	Loads the Image mode. Select an image mode from the pull-down menu
	and click Load button. There may not be available mode depending on the
	input mode as shown in the table left.

Input source

Image mode Video Computer

Dynamic	4	4
Standard	4	4
Cinema	4	*
Real	*	4
Blackboard(Green)	4	4
Colorboard	4	4
Image1 - 4	4	4

✐The mark "4" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".

ENGLISH

37