Sanyo PLC-XE33 owner manual What are the rules for IP address assignment?

Page 56

Chapter 5 Appendix

Others

QWhat are the rules for IP address assignment?

AIf the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assign- ment.

Rule1

Do not configure the same IP address to the network equipment in the same network group. Each piece of equipment must be assigned a unique IP address.

If the IP address is set [192.168.x.x], the Subnet Mask should be set [255.255.255.0] for example.

Rule2

The start address [xxx.xxx.xxx.0] and the last address [xxx.xxx.xxx.255] of the IP address must not be assigned to any other equipment. These address numbers are reserved.

Rule3

The IP address must correlate to a network number. If network numbers are different between the equipment, they cannot establish communications each other. In this case, the router is placed in the networks to make the rout- ing.

QCan I control the projector by using the telnet application?

APossible. Please refer to the item "Use of telnet" (☞ p.46 - 47).

QWhat is the MAC address assigned to the projector?

A The MAC address is displayed in "Network information" menu (☞ p.14).

56

Image 56

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationCompliance Federal Communications Commission NoticeAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersTrademarks Expression/AbbreviationUse of this manual Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Install the Software on computersPreparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Display of main setting Main setting page in the displaySub menu tab Switches the sub menu tab Main menu SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesInitial setting Sets the Network PIN code to login the setting page +p.23Switches PJLink password authentication on or off +p.23 Password for PJLink function +p.23Network PIN code setting PJLink and password settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Sets Dhcp or Manual Network configurationDisplays the selected LAN mode Mail setting Setting Smtp server and administrator addressSets server name or IP address of the Smtp server AbnormalityRegistering and deleting E-mail addresses Option selection for sending alert mailUp to 10 E-mail addresses can be registered Check / Delete OptionExamples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use timeSnmp setting Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Power control and status check Displays the status of the projectors power. Refer to nextPopup confirmation window PJ statusAbout projector condition Status DescriptionControl InputSystem Item DescriptionSound Suppresses the sound. ON, OFFImage adjustment Image mode Video ComputerPC adjustment Screen mode Video Computer Normal True Wide Full Custom Setting up the projectorScreen setting Setting Projector or Remote control. OFF Projector keys, Remote controlNormal mode Highland modeInformation Indication of the lamp statusItems Description StatusChapter Appendix To another network Examples of connectionPeer-To-Peer connection Gateway Router installed in the network Entrance hallUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?What is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KR5AC