Sanyo PLC-XE33 owner manual System, Item Description

Page 35

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu but- ton according to the input signal. Select a system and then click Set button.

Available selection at the RGB input

Item	Description

XGA1	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (VGA, SVGA, XGA.
	SXGA, UXGA, WXGA...) which meet the input sig-
	nal are listed.

Available selection at the Video/S-video/Scart input

Item	Description

AUTO	It automatically switches to the proper color sys-
	tem of the input signal.
	* The selectable color systems are PAL, SECAM,
	NTSC, NTSC4.43, PAL-M and PAL-N.
	* AUTO is fixed at the Scart input.

Available selection at the Component input

Item Description

........................AUTO	It automatically switches to the proper scanning
	system of the input signal.
	* The selectable scanning systems are 480i, 575i,
	480p, 575p, 720p, 1035i and 1080i.

Control

ENGLISH

✐ If the mode (Mode1 to Mode5, ExMode6 to ExMode50) which is stored in the item "PC Adjustment" (☞ p.38) is available, they are also listed together with the above mode.

35

Image 35

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationTelephone No 818998-7322 ComplianceFederal Communications Commission Notice AddressSafety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorTrademarks Expression/AbbreviationUse of this manual Install the Software on computers Flow of installationConnect the LAN and set the configuration Network Configuration has completedPreparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menuExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonPassword for PJLink function +p.23 Initial settingSets the Network PIN code to login the setting page +p.23 Switches PJLink password authentication on or off +p.23Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the passwordSets Dhcp or Manual Network configurationDisplays the selected LAN mode Abnormality Mail settingSetting Smtp server and administrator address Sets server name or IP address of the Smtp serverOption Registering and deleting E-mail addressesOption selection for sending alert mail Up to 10 E-mail addresses can be registered Check / DeleteExamples Type and contents of alert mail When lamp corres. value reaches preselect use time When PJ lamp replacement time is reachedSnmp setting Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector PJ status Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation windowStatus Description About projector conditionInput ControlItem Description SystemSuppresses the sound. ON, OFF SoundImage mode Video Computer Image adjustmentPC adjustment Screen mode Video Computer Normal True Wide Full Custom Setting up the projectorScreen setting Setting Highland mode Projector or Remote control. OFFProjector keys, Remote control Normal modeStatus InformationIndication of the lamp status Items DescriptionChapter Appendix To another network Examples of connectionPeer-To-Peer connection Entrance hall Gateway Router installed in the networkUse the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KR5AC