Sanyo PLC-XE33 owner manual Setting

Chapter 4 Controlling the Projector

Setting 1

Item	Description
Language	Sets the language display of projector's
Auto setup	on-screen display menu.
	Executes the Auto PC Adj, and Input
	Search function below according to the
	each setting after clicking Start button.
Auto PC Adj	Sets Auto PC Adjustment mode. (ON,
	OFF)
Input search	Sets the auto-input signal detection
	mode. (ON1, ON2, OFF)
Auto keystone	Sets Auto Keystone mode. (Auto, Manual,
Background	OFF)
	Sets the screen background when no signal input. (Blue, User, Black)
Display	Switches on or off the on-screen menu display on the screen. (OFF, Countdown Off,
	ON)
Logo	Countdown off........Displays image during the starting up.
	Sets on or off the logo display on the screen during the startup. (OFF, Default, User)

Setting 2

Item	Description
Ceiling	Sets the image top/bottom and left/
Rear	right reversed. (ON, OFF)
	Sets the image left/right reversed. (ON,
Terminal	OFF)
	Sets the COMPUTER IN 2/MONITOR OUT
Power	terminal to COMPUTER 2 or Monitor Out.
management	Sets into the selected power manage-
	ment mode (Ready, Shutdown, OFF) if
	the input signal is interrupted and no
	control key is pressed for the specified
	period of time.
On start	*The specified time can be set 1 to 30 min.
	Sets the power-on mode when the AC cord is connected to the outlet.
Lamp control	Selects lamp control mode. (High, Normal, Eco)
Lamp life
control	Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
	the recommended total hours of use.

40