Sanyo PLC-XE33 owner manual Use of telnet, Control, Use the IP address assigned to the projector

Page 46

Chapter 5 Appendix

Use of telnet

You can control the projector by using the telnet application*1 installed on your computer. Normally, the telnet application is available on your computer.

* The telnet 10000 port is used to control the projector.

Control

(For example, in case of using the telnet application of Windows XP Professional.)

1.Select Run... submenu from Start menu on the computer. Type "telnet" onto the Open text area on the displayed window and press OK button.

(For example, in case of using the telnet application of Mac OS X v 10.4)

1.Select Terminal from Applications -->Utilities.

Type as below on the displayed window. > telnet [return]

2.The telnet application will start and the following window will be displayed. Type as below to connect the projector.

>open 192.168.1.201 10000 [return]

* Use the IP address assigned to the projector.

46

Image 46

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationAddress ComplianceFederal Communications Commission Notice Telephone No 818998-7322Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersUse of this manual Expression/AbbreviationTrademarks Network Configuration has completed Flow of installationConnect the LAN and set the configuration Install the Software on computersPreparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesSwitches PJLink password authentication on or off +p.23 Initial settingSets the Network PIN code to login the setting page +p.23 Password for PJLink function +p.23To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink?Displays the selected LAN mode Network configurationSets Dhcp or Manual Sets server name or IP address of the Smtp server Mail settingSetting Smtp server and administrator address AbnormalityUp to 10 E-mail addresses can be registered Check / Delete Registering and deleting E-mail addressesOption selection for sending alert mail OptionExamples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use timeSnmp setting Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Popup confirmation window Power control and status checkDisplays the status of the projectors power. Refer to next PJ statusAbout projector condition Status DescriptionControl InputSystem Item DescriptionSound Suppresses the sound. ON, OFFImage adjustment Image mode Video ComputerPC adjustment Screen setting Setting up the projectorScreen mode Video Computer Normal True Wide Full Custom Setting Normal mode Projector or Remote control. OFFProjector keys, Remote control Highland modeItems Description InformationIndication of the lamp status StatusChapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the network Entrance hallControl Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?What is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KR5AC