Sanyo PLC-XE33 owner manual About projector condition, Status Description

Page 33

Power control and status check

About projector condition

Status	Description

Normal	Projector is operating normally.
Power management in operation	Power management is operating
Lamp failure	Lamp failure is occurring
Abnormal Temperature	The temperature of the projector became too high
Standby after Abnormal Temp	Projector detects abnormal temp. and sets into standby mode.
Power failure	Power failure has occurred inside the projector. Projector is turned
	off. Unplug the AC cord and ask servicing to a qualified service
	personnel.

When a security (PIN code lock) has been set on the projector, you also cannot control it through the network. To control the projector through the network, unlock the security on the projector using with the projector's menu control.

Caution about turning on/off the projector via the networks

When turning on/off the projector via the networks, preset the projector as fol- lows:

1.Select “Setting” from the Projector menu.

2.Select “Standby mode” from the Setting menu and set it as “Network”.

If you set this function as Network, the network part of the projector is con- stantly provided with power even if the projector is turned off. If you set this as Eco, then the network part will be turned off when you turn off the projector. Consequently, you cannot turn on/off the projector via the networks.

ENGLISH

33

Image 33

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationFederal Communications Commission Notice ComplianceAddress Telephone No 818998-7322Safety instructions Table of contents Chapter Web Management function +p.31 FeaturesRequired operating environment for computers Network specifications of the projectorExpression/Abbreviation Use of this manualTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Install the Software on computersPreparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonSets the Network PIN code to login the setting page +p.23 Initial settingSwitches PJLink password authentication on or off +p.23 Password for PJLink function +p.23PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Network configuration Displays the selected LAN modeSets Dhcp or Manual Setting Smtp server and administrator address Mail settingSets server name or IP address of the Smtp server AbnormalityOption selection for sending alert mail Registering and deleting E-mail addressesUp to 10 E-mail addresses can be registered Check / Delete OptionExamples Type and contents of alert mail When lamp corres. value reaches preselect use time When PJ lamp replacement time is reachedSnmp setting Up to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkPopup confirmation window PJ statusStatus Description About projector conditionInput ControlItem Description SystemSuppresses the sound. ON, OFF SoundImage mode Video Computer Image adjustmentPC adjustment Setting up the projector Screen settingScreen mode Video Computer Normal True Wide Full Custom Setting Projector keys, Remote control Projector or Remote control. OFFNormal mode Highland modeIndication of the lamp status InformationItems Description StatusChapter Appendix Examples of connection Peer-To-Peer connectionTo another network Entrance hall Gateway Router installed in the networkUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KR5AC