Sanyo PLC-XE33 owner manual Information, Indication of the lamp status, Items Description, Status

Page 42

Chapter 4 Controlling the Projector

Information

This page is to display the basic information of the projector status. Click Information on the main menu.

	Click this button to
	update the information.
Items	Description

Input	Displays selected input and source.
System	Displays selected signal system.
Signal	Input signal status (Yes, No)
Screen	Displays screen mode.
Lamp status	Displays lamp status with an animation. Refer to the table as shown below.
Security	Displays the security (PIN code lock) status (Yes, No)
PJ time(h)	Displays the accumulated use time of the projector.
Lamp Corres. Value(h) Displays the use time (Corresponding value) of the lamp.
Filter time(h)	Displays the accumulated use time of the filter.

42

Indication of the lamp status

Icon display/background	Status
White-Yellow/Blue	Lamp on (Normal)

White-Yellow/Red	Lamp on (Lamp is being used over a specified use time, replace lamp
White-Yellow/Red	immediately)
Gray/Blue	Lamp off (Normal)

Gray/Red	Lamp off (Lamp is being used over a specified use time, replace lamp
Gray/Red	immediately)
Red/Blue with X	Lamp failure (Lamp failure, check lamp condition)

Red/Red with X	Lamp failure (Lamp failure and lamp is being used over a specified use
Red/Red with X	time, replace lamp immediately)

Image 42

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationAddress ComplianceFederal Communications Commission Notice Telephone No 818998-7322Safety instructions Table of contents Chapter Features Web Management function +p.31Network specifications of the projector Required operating environment for computersExpression/Abbreviation Use of this manualTrademarks Network Configuration has completed Flow of installationConnect the LAN and set the configuration Install the Software on computersPreparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesSwitches PJLink password authentication on or off +p.23 Initial settingSets the Network PIN code to login the setting page +p.23 Password for PJLink function +p.23To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink?Network configuration Displays the selected LAN modeSets Dhcp or Manual Sets server name or IP address of the Smtp server Mail settingSetting Smtp server and administrator address AbnormalityUp to 10 E-mail addresses can be registered Check / Delete Registering and deleting E-mail addressesOption selection for sending alert mail OptionExamples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use timeSnmp setting Up to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Popup confirmation window Power control and status checkDisplays the status of the projectors power. Refer to next PJ statusAbout projector condition Status DescriptionControl InputSystem Item DescriptionSound Suppresses the sound. ON, OFFImage adjustment Image mode Video ComputerPC adjustment Setting up the projector Screen settingScreen mode Video Computer Normal True Wide Full Custom Setting Normal mode Projector or Remote control. OFFProjector keys, Remote control Highland modeItems Description InformationIndication of the lamp status StatusChapter Appendix Examples of connection Peer-To-Peer connectionTo another network Gateway Router installed in the network Entrance hallUse of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages?What is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KR5AC