Sanyo PLC-WL2503A owner manual Installation, Positioning the Projector, Adjustable Feet

Page 13

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. The projector will focus at distance from 2.09' to 3.93' (63.6 cm to 119.7 cm).

Note:

•This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance.

•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

•All measurements are approximate and may vary from the actual sizes.

3.93' (119.7 cm)

(Inch Diagonal)

2.83’ (86.1 cm)



 

 

 

 

 

 

2.09’ (63.6 cm)

 



 

 

 

 



$

Screen Size

60”

80”

110”

(W x H) mm

 

 

 

1292 x 808

1723 x 1077

2369 x 1481

16:10aspect ratio

 

 

 

 

Throw distance

2.09’ (63.6 cm)

2.83’ (86.1 cm)

3.93' (119.7 cm)

 

 

 

 

A

7.9” (20.0 cm)

9.7” (24.5 cm)

12.3” (31.3 cm)

 

 

 

 

Adjustable Feet

Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise.

To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise.

To correct keystone distortion, press the KEYSTONE button on the remote control or on the top control or select Keystone from the menu (see pages 23, 46).

Adjustable Feet

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Network Supported Multimedia ProjectorFeatures and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Installing the Projector in Proper Position Safety Instructions Air CirculationMoving the Projector AC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Front Side Part Names and Functions Kensington Security Slot ① LAN Connection Terminal Part Names and Functions Side TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Remote Control Code Remote Control Operating RangeTwo AAA size batteries Menu button Image buttonAdjustable Feet InstallationPositioning the Projector Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Projector side AC outlet side Installation Connecting the AC Power CordFor Continental Europe For the U..K For the U..S..A.. and CanadaBasic Operation Input signal guidance windowTurning On the Projector Selected Input Source and Lamp ControlPIN Code Input Dialog Box Basic OperationDirect OFF Function Basic Operation Turning Off the ProjectorRemote Control Basic Operation How to Operate the On-Screen MenuTop Control On-Screen MenuBasic Operation Main Menu Auto Setup Function Basic Operation Focus AdjustmentKeystone Correction Volume Basic Operation Sound AdjustmentVolume Dialog Box MuteBasic Operation Remote Control Operation No Show button Timer buttonImage button Screen buttonInput Source Selection Computer 1 RGB Computer InputInput Menu Input Menu Computer Input Input Source Selection Computer 2 RGBComputer 2 button Computer 2 RGB VideoPC System Menu Computer Input Computer System SelectionAuto ModePC adjust Menu Computer Input Auto PC adjustmentTo store adjustment parameters Auto PC adjComputer Input Manual PC adjustment Computer Input Mode free MenuStore Menu Computer Input Image Mode Selection Image adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentDigital zoom + Custom adjDigital zoom Custom adj.. Menu NoteInput Source Selection Video, S-video Video InputVideo Video button Video button S-videoVideo Input Input Source Selection Component, Scart , Hdmi AV System Menu Video or S-video Video Input Video System SelectionAV System Menu Component Or Computer 1Component and then pressVideo Input Image Mode Selection Image adjust Menu Video Input Image AdjustmentColor TintVideo Input Off Disabled Lower reduction Higher reduction ProgressiveNoise reduction Zoom Video Input Screen Size AdjustmentWide Natural wideSetting SettingSetting Menu Language Menu LanguageAuto setup Auto setupInput search Timer Power off? p.20Keystone BackgroundDefault Logo Logo and Logo PIN code lock settingsLogo select Logo selectCapture Capture Logo PIN code lockOff Logo PIN code lock Enter a Logo PIN code Logo PIN code change Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code changeCeiling Rear Hdmi setupStandby mode Power managementPower management Direct on Min . Only set to Count down , Timer isNote Count downOff , CC1 , CC2 , CC3 or CC4 Closed captionFrom Color to White Note Lamp control Remote controlTo change the code for the projector Security Key lock and PIN code lock Enter a PIN code Change the PIN code Fan Video delay controlFan control Lamp counterFactory default Factory defaultFilter counter Filter counterInput Source Information Display InformationProjector is shut down and the Warning indicator lights red Maintenance and CleaningNote Then check the matters below Resetting the Filter Counter Maintenance and Cleaning Replacing the FilterFilter counter Reset? Cleaning the Projection Lens Maintenance and Cleaning Attaching the Lens CoverCleaning the Projector Cabinet Reset the lamp counter Maintenance and Cleaning Lamp ReplacementService Parts No 349 Top PanelPress Select button. Lamp replacement counter Maintenance and Cleaning Resetting the Lamp CounterLamp replacement counter Reset? appears Appendix TroubleshootingNo image AppendixNo sound Color is strangeIndicator blinks or lights Remote Control doesImage is distorted or runs off PIN code dialog box appearsAppendix Menu Tree Information SettingIndicators Appendix Indicators and Projector Condition Note Appendix Compatible Computer SpecificationsFreq Technical Specifications Appendix Optional Parts Terminal Panel ReplacementControl Port Connector D-sub 9 pin Appendix Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Hdmi 19 PIN Type aPIN Code Lock No Appendix PIN Code Number MemoLogo PIN Code Lock No Attatching the Cable HolderPJ Link Notice Appendix DimensionsKJ8AH

PLC-WL2503A specifications

The Sanyo PLC-WL2503A is a cutting-edge projector designed to cater to the diverse needs of both professional and educational environments. With its compact design and advanced features, it stands out as a reliable option for users seeking high-quality visual performance.

One of the main features of the PLC-WL2503A is its impressive brightness output, reaching up to 2500 lumens. This high brightness level ensures that presentations and videos remain clear and vibrant even in well-lit environments. Coupled with a native XGA (1024 x 768) resolution, the projector delivers sharp and detailed images that enhance the professional look of any presentation.

The PLC-WL2503A utilizes advanced DLP (Digital Light Processing) technology, which provides exceptional color accuracy and consistency. This technology is known for its ability to produce vivid colors and deep blacks, making it an excellent choice for video playback and graphic presentations. Additionally, DLP technology allows for a longer lifespan of the projector's light source, resulting in reduced maintenance costs over time.

Another notable characteristic is the projector's versatility in connectivity options. The Sanyo PLC-WL2503A offers various input ports, including HDMI, VGA, and composite video, enabling easy connection to multiple devices such as laptops, DVD players, and gaming consoles. This flexibility ensures that users can seamlessly switch between different source devices without hassle.

In terms of usability, the PLC-WL2503A is designed with user-friendly features, including a straightforward interface and remote control. The integrated lens shift and keystone correction functionalities allow for easy adjustment of the image, enabling users to achieve optimal projection angles and alignment. This feature is especially beneficial in classroom and conference settings where space constraints can often pose challenges.

Furthermore, the projector boasts a lightweight and portable design, making it easy to transport to various locations. This is particularly advantageous for professionals who frequently travel for presentations or educational staff who move between classrooms.

The Sanyo PLC-WL2503A also incorporates eco-friendly technologies, such as an energy-saving mode that reduces power consumption while extending the life of the lamp. This focus on sustainability reflects a growing trend in technology to minimize environmental impact without compromising performance.

In conclusion, the Sanyo PLC-WL2503A combines impressive brightness, advanced DLP technology, versatile connectivity, and user-friendly features, making it an excellent choice for users in need of a reliable and efficient projector. Whether for business presentations or educational purposes, the PLC-WL2503A stands out as a powerful tool that delivers exceptional visual experiences.
Top Page Image Contents