Sanyo PLC-WL2503A owner manual Ceiling Rear, Hdmi setup

Page 50

Setting

Ceiling

When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Screen aspect

This function is used to project the image to a 4:3 or 16:9 projection screen.

4:3 ..... Set to a 4:3 projection screen.

16:9 ..... Set to a 16:9 projection screen.

16:10 ....16:10 is the aspect of the LCD panel. The original

Screen Menu is available.

HDMI setup

This function is only used for HDMI input source.

Image

Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment.

Sound

HDMI: When using the HDMI cable, select HDMI. Both video and audio are transferred and you need not to connect any additional cables for audio.

Computer : When using the DVI-HDMI cable, select Computer and connect the audio cable to

COMPUTER/COMPONENT AUDIO IN terminal.

The names for the output setting of Digital RGB vary from equipment to equipment. For details, refer to the owner’s manual of your Digital RGB equipment.

When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital RGB output equipment.

Terminal

The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.9).

Computer 2…… Computer input

Monitor Out…… Monitor out

Terminal function is not available when Computer 2 is selected to the input source. Change the input source to the others (Computer 1, Video or HDMI) so that the Terminal function is available (pp.27-28, 37-38).

Ceiling

Rear

Note:

•When 4:3 or 16:9 is selected, True and Digital zoom +/- are not available in the PC screen (pp.35-36).

•When 4:3 or 16:9 is selected, Zoom, Natural wide and Wide are not available in the AV screen (p.43).

HDMI setup

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Multimedia Projector Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom  Kensington Security Slot Part Names and FunctionsFront Side Part Names and Functions Side Terminal ① LAN Connection TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Two AAA size batteries Remote Control Operating RangeRemote Control Code Menu button Image buttonPositioning the Projector InstallationAdjustable Feet Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment For Continental Europe For the U..K Installation Connecting the AC Power CordProjector side AC outlet side For the U..S..A.. and CanadaTurning On the Projector Input signal guidance windowBasic Operation Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Direct OFF FunctionTop Control Basic Operation How to Operate the On-Screen MenuRemote Control On-Screen MenuBasic Operation Main Menu Keystone Correction Basic Operation Focus AdjustmentAuto Setup Function Volume Dialog Box Basic Operation Sound AdjustmentVolume MuteBasic Operation Remote Control Operation Image button Timer buttonNo Show button Screen buttonInput Menu Computer InputInput Source Selection Computer 1 RGB Computer 2 button Computer 2 RGB Computer Input Input Source Selection Computer 2 RGBInput Menu VideoAuto Computer Input Computer System SelectionPC System Menu ModeTo store adjustment parameters Computer Input Auto PC adjustmentPC adjust Menu Auto PC adjComputer Input Manual PC adjustment Store Menu Mode free MenuComputer Input Computer Input Image Mode Selection Computer Input Image Adjustment Image adjust MenuScreen Size Adjustment Screen MenuDigital zoom Custom adjDigital zoom + Custom adj.. Menu NoteVideo Video InputInput Source Selection Video, S-video Video button Video button S-videoVideo Input Input Source Selection Component, Scart , Hdmi AV System Menu Component Video Input Video System SelectionAV System Menu Video or S-video Or Computer 1Component and then pressVideo Input Image Mode Selection Color Video Input Image AdjustmentImage adjust Menu TintNoise reduction Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Wide Video Input Screen Size AdjustmentZoom Natural wideSetting Menu Language Menu SettingSetting LanguageInput search Auto setupAuto setup Keystone Power off? p.20Timer BackgroundLogo select Logo Logo and Logo PIN code lock settingsDefault Logo selectOff Logo PIN code lock Capture Logo PIN code lockCapture Enter a Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code change Logo PIN code changeHdmi setup Ceiling RearPower management Power managementStandby mode Note Min . Only set to Count down , Timer isDirect on Count downFrom Color to White Note Closed captionOff , CC1 , CC2 , CC3 or CC4 To change the code for the projector Remote controlLamp control Security Key lock and PIN code lock Enter a PIN code Change the PIN code Fan control Video delay controlFan Lamp counterFilter counter Factory defaultFactory default Filter counterInformation Input Source Information DisplayNote Then check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Reset? Maintenance and Cleaning Replacing the FilterResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CoverCleaning the Projection Lens Service Parts No 349 Maintenance and Cleaning Lamp ReplacementReset the lamp counter Top PanelLamp replacement counter Reset? appears Maintenance and Cleaning Resetting the Lamp CounterPress Select button. Lamp replacement counter Troubleshooting AppendixNo sound AppendixNo image Color is strangeImage is distorted or runs off Remote Control doesIndicator blinks or lights PIN code dialog box appearsAppendix Menu Tree Setting InformationAppendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications  NoteFreq Technical Specifications Terminal Panel Replacement Appendix Optional PartsTerminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsControl Port Connector D-sub 9 pin Hdmi 19 PIN Type aLogo PIN Code Lock No Appendix PIN Code Number MemoPIN Code Lock No Attatching the Cable HolderAppendix Dimensions PJ Link NoticeKJ8AH

PLC-WL2503A specifications

The Sanyo PLC-WL2503A is a cutting-edge projector designed to cater to the diverse needs of both professional and educational environments. With its compact design and advanced features, it stands out as a reliable option for users seeking high-quality visual performance.

One of the main features of the PLC-WL2503A is its impressive brightness output, reaching up to 2500 lumens. This high brightness level ensures that presentations and videos remain clear and vibrant even in well-lit environments. Coupled with a native XGA (1024 x 768) resolution, the projector delivers sharp and detailed images that enhance the professional look of any presentation.

The PLC-WL2503A utilizes advanced DLP (Digital Light Processing) technology, which provides exceptional color accuracy and consistency. This technology is known for its ability to produce vivid colors and deep blacks, making it an excellent choice for video playback and graphic presentations. Additionally, DLP technology allows for a longer lifespan of the projector's light source, resulting in reduced maintenance costs over time.

Another notable characteristic is the projector's versatility in connectivity options. The Sanyo PLC-WL2503A offers various input ports, including HDMI, VGA, and composite video, enabling easy connection to multiple devices such as laptops, DVD players, and gaming consoles. This flexibility ensures that users can seamlessly switch between different source devices without hassle.

In terms of usability, the PLC-WL2503A is designed with user-friendly features, including a straightforward interface and remote control. The integrated lens shift and keystone correction functionalities allow for easy adjustment of the image, enabling users to achieve optimal projection angles and alignment. This feature is especially beneficial in classroom and conference settings where space constraints can often pose challenges.

Furthermore, the projector boasts a lightweight and portable design, making it easy to transport to various locations. This is particularly advantageous for professionals who frequently travel for presentations or educational staff who move between classrooms.

The Sanyo PLC-WL2503A also incorporates eco-friendly technologies, such as an energy-saving mode that reduces power consumption while extending the life of the lamp. This focus on sustainability reflects a growing trend in technology to minimize environmental impact without compromising performance.

In conclusion, the Sanyo PLC-WL2503A combines impressive brightness, advanced DLP technology, versatile connectivity, and user-friendly features, making it an excellent choice for users in need of a reliable and efficient projector. Whether for business presentations or educational purposes, the PLC-WL2503A stands out as a powerful tool that delivers exceptional visual experiences.
Top Page Image Contents