Sanyo PLC-WL2503A Installation Connecting the AC Power Cord, Projector side AC outlet side

Page 17

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consult your authorized dealer or service center.

Connect the projector with all peripheral equipment before turning it on.

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

Note:

Connect the AC power cord (supplied) to the projector.

Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

NOTE ON THE POWER CORD

AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side

AC outlet side

 

For the U..S..A.. and Canada

For Continental Europe

For the U..K..

 

 

 

Ground

 

Ground

 

 

To power cord

To the AC outlet.

To the AC outlet.

To the AC outlet.

connector on your

projector.

(120 V AC)

(200 - 240 V AC)

(200 - 240 V AC)

17

Image 17
Contents Network Supported Multimedia ProjectorFeatures and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom  Kensington Security Slot Part Names and FunctionsFront Side ① LAN Connection Terminal Part Names and Functions Side TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Remote Control Code Remote Control Operating RangeTwo AAA size batteries Menu button Image buttonPositioning the Projector InstallationAdjustable Feet Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Projector side AC outlet side Installation Connecting the AC Power CordFor Continental Europe For the U..K For the U..S..A.. and CanadaBasic Operation Input signal guidance windowTurning On the Projector Selected Input Source and Lamp ControlPIN Code Input Dialog Box Basic OperationDirect OFF Function Basic Operation Turning Off the ProjectorRemote Control Basic Operation How to Operate the On-Screen MenuTop Control On-Screen MenuBasic Operation Main Menu Keystone Correction Basic Operation Focus AdjustmentAuto Setup Function Volume Basic Operation Sound AdjustmentVolume Dialog Box MuteBasic Operation Remote Control Operation No Show button Timer buttonImage button Screen buttonInput Menu Computer InputInput Source Selection Computer 1 RGB Input Menu Computer Input Input Source Selection Computer 2 RGBComputer 2 button Computer 2 RGB VideoPC System Menu Computer Input Computer System SelectionAuto ModePC adjust Menu Computer Input Auto PC adjustmentTo store adjustment parameters Auto PC adjComputer Input Manual PC adjustment Store Menu Mode free MenuComputer Input Computer Input Image Mode Selection Image adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentDigital zoom + Custom adjDigital zoom Custom adj.. Menu NoteInput Source Selection Video, S-video Video InputVideo Video button Video button S-videoVideo Input Input Source Selection Component, Scart , Hdmi AV System Menu Video or S-video Video Input Video System SelectionAV System Menu Component Or Computer 1Component and then pressVideo Input Image Mode Selection Image adjust Menu Video Input Image AdjustmentColor TintNoise reduction Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Zoom Video Input Screen Size AdjustmentWide Natural wideSetting SettingSetting Menu Language Menu LanguageInput search Auto setupAuto setup Timer Power off? p.20Keystone BackgroundDefault Logo Logo and Logo PIN code lock settingsLogo select Logo selectOff Logo PIN code lock Capture Logo PIN code lockCapture Enter a Logo PIN code Logo PIN code change Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code changeCeiling Rear Hdmi setupPower management Power managementStandby mode Direct on Min . Only set to Count down , Timer isNote Count downFrom Color to White Note Closed captionOff , CC1 , CC2 , CC3 or CC4 To change the code for the projector Remote controlLamp control Security Key lock and PIN code lock Enter a PIN code Change the PIN code Fan Video delay controlFan control Lamp counterFactory default Factory defaultFilter counter Filter counterInput Source Information Display InformationNote Then check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Reset? Maintenance and Cleaning Replacing the FilterResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CoverCleaning the Projection Lens Reset the lamp counter Maintenance and Cleaning Lamp ReplacementService Parts No 349 Top PanelLamp replacement counter Reset? appears Maintenance and Cleaning Resetting the Lamp CounterPress Select button. Lamp replacement counter Appendix TroubleshootingNo image AppendixNo sound Color is strangeIndicator blinks or lights Remote Control doesImage is distorted or runs off PIN code dialog box appearsAppendix Menu Tree Information SettingIndicators Appendix Indicators and Projector Condition Note Appendix Compatible Computer SpecificationsFreq Technical Specifications Appendix Optional Parts Terminal Panel ReplacementControl Port Connector D-sub 9 pin Appendix Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Hdmi 19 PIN Type aPIN Code Lock No Appendix PIN Code Number MemoLogo PIN Code Lock No Attatching the Cable HolderPJ Link Notice Appendix DimensionsKJ8AH

PLC-WL2503A specifications

The Sanyo PLC-WL2503A is a cutting-edge projector designed to cater to the diverse needs of both professional and educational environments. With its compact design and advanced features, it stands out as a reliable option for users seeking high-quality visual performance.

One of the main features of the PLC-WL2503A is its impressive brightness output, reaching up to 2500 lumens. This high brightness level ensures that presentations and videos remain clear and vibrant even in well-lit environments. Coupled with a native XGA (1024 x 768) resolution, the projector delivers sharp and detailed images that enhance the professional look of any presentation.

The PLC-WL2503A utilizes advanced DLP (Digital Light Processing) technology, which provides exceptional color accuracy and consistency. This technology is known for its ability to produce vivid colors and deep blacks, making it an excellent choice for video playback and graphic presentations. Additionally, DLP technology allows for a longer lifespan of the projector's light source, resulting in reduced maintenance costs over time.

Another notable characteristic is the projector's versatility in connectivity options. The Sanyo PLC-WL2503A offers various input ports, including HDMI, VGA, and composite video, enabling easy connection to multiple devices such as laptops, DVD players, and gaming consoles. This flexibility ensures that users can seamlessly switch between different source devices without hassle.

In terms of usability, the PLC-WL2503A is designed with user-friendly features, including a straightforward interface and remote control. The integrated lens shift and keystone correction functionalities allow for easy adjustment of the image, enabling users to achieve optimal projection angles and alignment. This feature is especially beneficial in classroom and conference settings where space constraints can often pose challenges.

Furthermore, the projector boasts a lightweight and portable design, making it easy to transport to various locations. This is particularly advantageous for professionals who frequently travel for presentations or educational staff who move between classrooms.

The Sanyo PLC-WL2503A also incorporates eco-friendly technologies, such as an energy-saving mode that reduces power consumption while extending the life of the lamp. This focus on sustainability reflects a growing trend in technology to minimize environmental impact without compromising performance.

In conclusion, the Sanyo PLC-WL2503A combines impressive brightness, advanced DLP technology, versatile connectivity, and user-friendly features, making it an excellent choice for users in need of a reliable and efficient projector. Whether for business presentations or educational purposes, the PLC-WL2503A stands out as a powerful tool that delivers exceptional visual experiences.