Sanyo PLC-WL2503A owner manual Video Input, Noise reduction

Page 42

Video Input

Sharpness

Press the Point button to decrease the sharpness of the image; press the Point button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off

Disabled.

L 1

Lower reduction.

L 2

Higher reduction.

Progressive

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off

Disabled.

L 1

For an active picture.

L 2

For a still picture.

Film

For watching a film. With this function, the

 

projector reproduces pictures faithful to the

 

original film quality.

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point

button or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button.

A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1-4) in the Image Mode Selection on page 40.

Note:

Noise reduction and Progressive can not be selected when 480p, 575p, 720p, 1035i or 1080i is selected (p.39), or Video delay control function is set to On in Setting menu (p.57).

Store Menu

A confirmation box appears and then select Yes..

42

Image 42
Contents Multimedia Projector Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Part Names and Functions Front Side Kensington Security Slot Part Names and Functions Side Terminal ① LAN Connection TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Two AAA size batteries Remote Control Operating RangeRemote Control Code Menu button Image buttonInstallation Adjustable FeetPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment For Continental Europe For the U..K Installation Connecting the AC Power CordProjector side AC outlet side For the U..S..A.. and CanadaTurning On the Projector Input signal guidance windowBasic Operation Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Direct OFF FunctionTop Control Basic Operation How to Operate the On-Screen MenuRemote Control On-Screen MenuBasic Operation Main Menu Basic Operation Focus Adjustment Auto Setup FunctionKeystone Correction Volume Dialog Box Basic Operation Sound AdjustmentVolume MuteBasic Operation Remote Control Operation Image button Timer buttonNo Show button Screen buttonComputer Input Input Source Selection Computer 1 RGBInput Menu Computer 2 button Computer 2 RGB Computer Input Input Source Selection Computer 2 RGBInput Menu VideoAuto Computer Input Computer System SelectionPC System Menu ModeTo store adjustment parameters Computer Input Auto PC adjustmentPC adjust Menu Auto PC adjComputer Input Manual PC adjustment Mode free Menu Computer InputStore Menu Computer Input Image Mode Selection Computer Input Image Adjustment Image adjust MenuScreen Size Adjustment Screen MenuDigital zoom Custom adjDigital zoom + Custom adj.. Menu NoteVideo Video InputInput Source Selection Video, S-video Video button Video button S-videoVideo Input Input Source Selection Component, Scart , Hdmi AV System Menu Component Video Input Video System SelectionAV System Menu Video or S-video Or Computer 1Component and then pressVideo Input Image Mode Selection Color Video Input Image AdjustmentImage adjust Menu TintOff Disabled Lower reduction Higher reduction Progressive Video InputNoise reduction Wide Video Input Screen Size AdjustmentZoom Natural wideSetting Menu Language Menu SettingSetting LanguageAuto setup Auto setupInput search Keystone Power off? p.20Timer BackgroundLogo select Logo Logo and Logo PIN code lock settingsDefault Logo selectCapture Logo PIN code lock CaptureOff Logo PIN code lock Enter a Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code change Logo PIN code changeHdmi setup Ceiling RearPower management Standby modePower management Note Min . Only set to Count down , Timer isDirect on Count downClosed caption Off , CC1 , CC2 , CC3 or CC4From Color to White Note Remote control Lamp controlTo change the code for the projector Security Key lock and PIN code lock Enter a PIN code Change the PIN code Fan control Video delay controlFan Lamp counterFilter counter Factory defaultFactory default Filter counterInformation Input Source Information DisplayMaintenance and Cleaning Projector is shut down and the Warning indicator lights redNote Then check the matters below Maintenance and Cleaning Replacing the Filter Resetting the Filter CounterFilter counter Reset? Maintenance and Cleaning Attaching the Lens Cover Cleaning the Projection LensCleaning the Projector Cabinet Service Parts No 349 Maintenance and Cleaning Lamp ReplacementReset the lamp counter Top PanelMaintenance and Cleaning Resetting the Lamp Counter Press Select button. Lamp replacement counterLamp replacement counter Reset? appears Troubleshooting AppendixNo sound AppendixNo image Color is strangeImage is distorted or runs off Remote Control doesIndicator blinks or lights PIN code dialog box appearsAppendix Menu Tree Setting InformationAppendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications  NoteFreq Technical Specifications Terminal Panel Replacement Appendix Optional PartsTerminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsControl Port Connector D-sub 9 pin Hdmi 19 PIN Type aLogo PIN Code Lock No Appendix PIN Code Number MemoPIN Code Lock No Attatching the Cable HolderAppendix Dimensions PJ Link NoticeKJ8AH

PLC-WL2503A specifications

The Sanyo PLC-WL2503A is a cutting-edge projector designed to cater to the diverse needs of both professional and educational environments. With its compact design and advanced features, it stands out as a reliable option for users seeking high-quality visual performance.

One of the main features of the PLC-WL2503A is its impressive brightness output, reaching up to 2500 lumens. This high brightness level ensures that presentations and videos remain clear and vibrant even in well-lit environments. Coupled with a native XGA (1024 x 768) resolution, the projector delivers sharp and detailed images that enhance the professional look of any presentation.

The PLC-WL2503A utilizes advanced DLP (Digital Light Processing) technology, which provides exceptional color accuracy and consistency. This technology is known for its ability to produce vivid colors and deep blacks, making it an excellent choice for video playback and graphic presentations. Additionally, DLP technology allows for a longer lifespan of the projector's light source, resulting in reduced maintenance costs over time.

Another notable characteristic is the projector's versatility in connectivity options. The Sanyo PLC-WL2503A offers various input ports, including HDMI, VGA, and composite video, enabling easy connection to multiple devices such as laptops, DVD players, and gaming consoles. This flexibility ensures that users can seamlessly switch between different source devices without hassle.

In terms of usability, the PLC-WL2503A is designed with user-friendly features, including a straightforward interface and remote control. The integrated lens shift and keystone correction functionalities allow for easy adjustment of the image, enabling users to achieve optimal projection angles and alignment. This feature is especially beneficial in classroom and conference settings where space constraints can often pose challenges.

Furthermore, the projector boasts a lightweight and portable design, making it easy to transport to various locations. This is particularly advantageous for professionals who frequently travel for presentations or educational staff who move between classrooms.

The Sanyo PLC-WL2503A also incorporates eco-friendly technologies, such as an energy-saving mode that reduces power consumption while extending the life of the lamp. This focus on sustainability reflects a growing trend in technology to minimize environmental impact without compromising performance.

In conclusion, the Sanyo PLC-WL2503A combines impressive brightness, advanced DLP technology, versatile connectivity, and user-friendly features, making it an excellent choice for users in need of a reliable and efficient projector. Whether for business presentations or educational purposes, the PLC-WL2503A stands out as a powerful tool that delivers exceptional visual experiences.