Sanyo PLC-WL2503A owner manual Fan control, Video delay control, Lamp counter

Page 57

Setting

Fan

This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20).

L 1...... Normal operation

L 2...... Slower, lower-sound and longish-time than the

normal operation (L1).

Fan control

Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector.

Off............ Normal speed. Set this function to Off when

using the projector in non-high altitude environment.

On 1......... Faster than Off mode. Select this mode when

using the projector in high altitudes (about 1,200 meters or more above the sea level) where the fans have less cooling effect.

On 2......... Faster than On 1 mode. Select this mode

when using the projector in higher altitudes than above where the fans have lesser cooling effect.

Video delay control

When you want to make a digital processing of a projected image faster, set this function.

Use the Point ▲▼ buttons, select an item of Off or On.

Lamp counter

This function is used to display the cumulative lamp operating time and reset the lamp counter.

When the total lighting time of a lamp exceeds the recommended total hours of use, the Lamp replacement icon (Fig.1) will appear on the screen, indicating that the end of lamp life is reached.

When replacing the projection lamp, reset lamp counter. See "Resetting the Lamp Counter" on page 64.

Note:

The Lamp replacement icon (Fig.1) will not appear when the Display function is set to Off (p.46), or Freeze (p.25), or No show (p.26).

Note:

Fan noise becomes louder in On 1 and On 2.

Failure to set the running speed of cooling fans properly may affect the projector life.

Note:

Noise reduction and Progressive can not be selected when Video delay control function is set to On.

Fig..1 Lamp replacement icon

This icon appears on the screen when the end of lamp life is reached.

Note:

At turning on, the icon (Fig.1) will appear.

57

Image 57
Contents Network Supported Multimedia ProjectorFeatures and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Safety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Part Names and Functions Front Side Kensington Security Slot ① LAN Connection Terminal Part Names and Functions Side TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Remote Control Code Remote Control Operating RangeTwo AAA size batteries Menu button Image buttonInstallation Adjustable FeetPositioning the Projector Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Projector side AC outlet side Installation Connecting the AC Power CordFor Continental Europe For the U..K For the U..S..A.. and CanadaBasic Operation Input signal guidance windowTurning On the Projector Selected Input Source and Lamp ControlPIN Code Input Dialog Box Basic OperationDirect OFF Function Basic Operation Turning Off the ProjectorRemote Control Basic Operation How to Operate the On-Screen MenuTop Control On-Screen MenuBasic Operation Main Menu Basic Operation Focus Adjustment Auto Setup FunctionKeystone Correction Volume Basic Operation Sound AdjustmentVolume Dialog Box MuteBasic Operation Remote Control Operation No Show button Timer buttonImage button Screen buttonComputer Input Input Source Selection Computer 1 RGBInput Menu Input Menu Computer Input Input Source Selection Computer 2 RGBComputer 2 button Computer 2 RGB VideoPC System Menu Computer Input Computer System SelectionAuto ModePC adjust Menu Computer Input Auto PC adjustmentTo store adjustment parameters Auto PC adjComputer Input Manual PC adjustment Mode free Menu Computer InputStore Menu Computer Input Image Mode Selection Image adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentDigital zoom + Custom adjDigital zoom Custom adj.. Menu NoteInput Source Selection Video, S-video Video InputVideo Video button Video button S-videoVideo Input Input Source Selection Component, Scart , Hdmi AV System Menu Video or S-video Video Input Video System SelectionAV System Menu Component Or Computer 1Component and then pressVideo Input Image Mode Selection Image adjust Menu Video Input Image AdjustmentColor TintOff Disabled Lower reduction Higher reduction Progressive Video InputNoise reduction Zoom Video Input Screen Size AdjustmentWide Natural wideSetting SettingSetting Menu Language Menu LanguageAuto setup Auto setupInput search Timer Power off? p.20Keystone BackgroundDefault Logo Logo and Logo PIN code lock settingsLogo select Logo selectCapture Logo PIN code lock CaptureOff Logo PIN code lock Enter a Logo PIN code Logo PIN code change Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code changeCeiling Rear Hdmi setupPower management Standby modePower management Direct on Min . Only set to Count down , Timer isNote Count downClosed caption Off , CC1 , CC2 , CC3 or CC4From Color to White Note Remote control Lamp controlTo change the code for the projector Security Key lock and PIN code lock Enter a PIN code Change the PIN code Fan Video delay controlFan control Lamp counterFactory default Factory defaultFilter counter Filter counterInput Source Information Display InformationMaintenance and Cleaning Projector is shut down and the Warning indicator lights redNote Then check the matters below Maintenance and Cleaning Replacing the Filter Resetting the Filter CounterFilter counter Reset? Maintenance and Cleaning Attaching the Lens Cover Cleaning the Projection LensCleaning the Projector Cabinet Reset the lamp counter Maintenance and Cleaning Lamp ReplacementService Parts No 349 Top PanelMaintenance and Cleaning Resetting the Lamp Counter Press Select button. Lamp replacement counterLamp replacement counter Reset? appears Appendix TroubleshootingNo image AppendixNo sound Color is strangeIndicator blinks or lights Remote Control doesImage is distorted or runs off PIN code dialog box appearsAppendix Menu Tree Information SettingIndicators Appendix Indicators and Projector Condition Note Appendix Compatible Computer SpecificationsFreq Technical Specifications Appendix Optional Parts Terminal Panel ReplacementControl Port Connector D-sub 9 pin Appendix Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Hdmi 19 PIN Type aPIN Code Lock No Appendix PIN Code Number MemoLogo PIN Code Lock No Attatching the Cable HolderPJ Link Notice Appendix DimensionsKJ8AH

PLC-WL2503A specifications

The Sanyo PLC-WL2503A is a cutting-edge projector designed to cater to the diverse needs of both professional and educational environments. With its compact design and advanced features, it stands out as a reliable option for users seeking high-quality visual performance.

One of the main features of the PLC-WL2503A is its impressive brightness output, reaching up to 2500 lumens. This high brightness level ensures that presentations and videos remain clear and vibrant even in well-lit environments. Coupled with a native XGA (1024 x 768) resolution, the projector delivers sharp and detailed images that enhance the professional look of any presentation.

The PLC-WL2503A utilizes advanced DLP (Digital Light Processing) technology, which provides exceptional color accuracy and consistency. This technology is known for its ability to produce vivid colors and deep blacks, making it an excellent choice for video playback and graphic presentations. Additionally, DLP technology allows for a longer lifespan of the projector's light source, resulting in reduced maintenance costs over time.

Another notable characteristic is the projector's versatility in connectivity options. The Sanyo PLC-WL2503A offers various input ports, including HDMI, VGA, and composite video, enabling easy connection to multiple devices such as laptops, DVD players, and gaming consoles. This flexibility ensures that users can seamlessly switch between different source devices without hassle.

In terms of usability, the PLC-WL2503A is designed with user-friendly features, including a straightforward interface and remote control. The integrated lens shift and keystone correction functionalities allow for easy adjustment of the image, enabling users to achieve optimal projection angles and alignment. This feature is especially beneficial in classroom and conference settings where space constraints can often pose challenges.

Furthermore, the projector boasts a lightweight and portable design, making it easy to transport to various locations. This is particularly advantageous for professionals who frequently travel for presentations or educational staff who move between classrooms.

The Sanyo PLC-WL2503A also incorporates eco-friendly technologies, such as an energy-saving mode that reduces power consumption while extending the life of the lamp. This focus on sustainability reflects a growing trend in technology to minimize environmental impact without compromising performance.

In conclusion, the Sanyo PLC-WL2503A combines impressive brightness, advanced DLP technology, versatile connectivity, and user-friendly features, making it an excellent choice for users in need of a reliable and efficient projector. Whether for business presentations or educational purposes, the PLC-WL2503A stands out as a powerful tool that delivers exceptional visual experiences.