Sanyo PLC-WL2503A owner manual Basic Operation Turning Off the Projector, Direct OFF Function

Page 20

Basic Operation

Turning Off the Projector

1

Press the ON/STAND-BY button on the remote control

or on the top control, and Power off? appears on the

 

screen.

2

Press the ON/STAND-BY button again to turn off the

projector. The POWER indicator starts to blink red, and

 

the cooling fans keep running. (You can select the level

 

of fans’ quietness and speed. See “Fan” on page 57.)

 

At this time, you can unplug the AC power cord even if

 

the fans are still running.

3

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

the projector.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET ITSTAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

Note:

When the Direct on function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet. (p. 52)

The running speed of cooling fans is changed according to the temperature inside the projector.

Do not put the projector in a case before the projector is cooled enough.

If the WARNING indicator blinks or lights red, see “WARNING indicator” on page 60.

While the POWER indicator is blinking, the lamp is being cooled down and the projector can not be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power- off.

Power off? disappears after 4 seconds.

Direct OFF Function

You can disconnect the power cord from the wall outlet or turn off the breaker even during projection without pressing the ON/STAND-BY button.

Note:

When using the Direct OFF function, you cannot restart the projector immediately after the power is disconnected. If the external power supply is suddenly cut off, the fans stop immediately. The lamp remains high temperature and needs to be cooled.

20

Image 20
Contents Multimedia Projector Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom  Kensington Security Slot Part Names and FunctionsFront Side Part Names and Functions Side Terminal ① LAN Connection TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Remote Control Operating Range Remote Control CodeTwo AAA size batteries Menu button Image buttonPositioning the Projector InstallationAdjustable Feet Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Installation Connecting the AC Power Cord Projector side AC outlet sideFor Continental Europe For the U..K For the U..S..A.. and CanadaInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Direct OFF FunctionBasic Operation How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuBasic Operation Main Menu Keystone Correction Basic Operation Focus AdjustmentAuto Setup Function Basic Operation Sound Adjustment VolumeVolume Dialog Box MuteBasic Operation Remote Control Operation Timer button No Show buttonImage button Screen buttonInput Menu Computer InputInput Source Selection Computer 1 RGB Computer Input Input Source Selection Computer 2 RGB Input MenuComputer 2 button Computer 2 RGB VideoComputer Input Computer System Selection PC System MenuAuto ModeComputer Input Auto PC adjustment PC adjust MenuTo store adjustment parameters Auto PC adjComputer Input Manual PC adjustment Store Menu Mode free MenuComputer Input Computer Input Image Mode Selection Computer Input Image Adjustment Image adjust MenuScreen Size Adjustment Screen MenuCustom adj Digital zoom +Digital zoom Custom adj.. Menu NoteVideo Input Input Source Selection Video, S-videoVideo Video button Video button S-videoVideo Input Input Source Selection Component, Scart , Hdmi Video Input Video System Selection AV System Menu Video or S-videoAV System Menu Component Or Computer 1Component and then pressVideo Input Image Mode Selection Video Input Image Adjustment Image adjust MenuColor TintNoise reduction Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Video Input Screen Size Adjustment ZoomWide Natural wideSetting SettingSetting Menu Language Menu LanguageInput search Auto setupAuto setup Power off? p.20 TimerKeystone BackgroundLogo Logo and Logo PIN code lock settings DefaultLogo select Logo selectOff Logo PIN code lock Capture Logo PIN code lockCapture Change the Logo PIN code lock setting Enter a Logo PIN code Logo PIN code changeEnter a Logo PIN code Logo PIN code changeHdmi setup Ceiling RearPower management Power managementStandby mode Min . Only set to Count down , Timer is Direct onNote Count downFrom Color to White Note Closed captionOff , CC1 , CC2 , CC3 or CC4 To change the code for the projector Remote controlLamp control Security Key lock and PIN code lock Enter a PIN code Change the PIN code Video delay control FanFan control Lamp counterFactory default Factory defaultFilter counter Filter counterInformation Input Source Information DisplayNote Then check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Reset? Maintenance and Cleaning Replacing the FilterResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CoverCleaning the Projection Lens Maintenance and Cleaning Lamp Replacement Reset the lamp counterService Parts No 349 Top PanelLamp replacement counter Reset? appears Maintenance and Cleaning Resetting the Lamp CounterPress Select button. Lamp replacement counter Troubleshooting AppendixAppendix No imageNo sound Color is strangeRemote Control does Indicator blinks or lightsImage is distorted or runs off PIN code dialog box appearsAppendix Menu Tree Setting InformationAppendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications  NoteFreq Technical Specifications Terminal Panel Replacement Appendix Optional PartsAppendix Configurations of Terminals Control Port Connector D-sub 9 pinTerminal Analog RGB Mini D-sub 15 pin Hdmi 19 PIN Type aAppendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Attatching the Cable HolderAppendix Dimensions PJ Link NoticeKJ8AH

PLC-WL2503A specifications

The Sanyo PLC-WL2503A is a cutting-edge projector designed to cater to the diverse needs of both professional and educational environments. With its compact design and advanced features, it stands out as a reliable option for users seeking high-quality visual performance.

One of the main features of the PLC-WL2503A is its impressive brightness output, reaching up to 2500 lumens. This high brightness level ensures that presentations and videos remain clear and vibrant even in well-lit environments. Coupled with a native XGA (1024 x 768) resolution, the projector delivers sharp and detailed images that enhance the professional look of any presentation.

The PLC-WL2503A utilizes advanced DLP (Digital Light Processing) technology, which provides exceptional color accuracy and consistency. This technology is known for its ability to produce vivid colors and deep blacks, making it an excellent choice for video playback and graphic presentations. Additionally, DLP technology allows for a longer lifespan of the projector's light source, resulting in reduced maintenance costs over time.

Another notable characteristic is the projector's versatility in connectivity options. The Sanyo PLC-WL2503A offers various input ports, including HDMI, VGA, and composite video, enabling easy connection to multiple devices such as laptops, DVD players, and gaming consoles. This flexibility ensures that users can seamlessly switch between different source devices without hassle.

In terms of usability, the PLC-WL2503A is designed with user-friendly features, including a straightforward interface and remote control. The integrated lens shift and keystone correction functionalities allow for easy adjustment of the image, enabling users to achieve optimal projection angles and alignment. This feature is especially beneficial in classroom and conference settings where space constraints can often pose challenges.

Furthermore, the projector boasts a lightweight and portable design, making it easy to transport to various locations. This is particularly advantageous for professionals who frequently travel for presentations or educational staff who move between classrooms.

The Sanyo PLC-WL2503A also incorporates eco-friendly technologies, such as an energy-saving mode that reduces power consumption while extending the life of the lamp. This focus on sustainability reflects a growing trend in technology to minimize environmental impact without compromising performance.

In conclusion, the Sanyo PLC-WL2503A combines impressive brightness, advanced DLP technology, versatile connectivity, and user-friendly features, making it an excellent choice for users in need of a reliable and efficient projector. Whether for business presentations or educational purposes, the PLC-WL2503A stands out as a powerful tool that delivers exceptional visual experiences.