Sanyo PLC-WL2503A Basic Operation Focus Adjustment, Auto Setup Function, Keystone Correction

Page 23

Basic Operation

Focus Adjustment

Adjust the lens focus with the focus lever.

 

Focus Lever

Auto Setup Function

Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search and Auto PC adj. functions) in the Setting Menu by just pressing the AUTO SET button on the remote control. Refer to page 45 for the setting of the Auto setup function.

Note:

Fine sync, Total dots, Horizontal and Vertical position of some computers can not be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp.31-32)

Remote Control

HDMI

AUTO SET button

Keystone Correction

Press the KEYSTONE button on the remote control or on

 

the top control. The Keystone dialog box appears. Use

 

the Point ▲▼ buttons to correct keystone distortion. The

Remote Control

keystone adjustment can be stored (see page 46).

Reduce the upper width

Reduce the lower width

 

with the Point ▲ button.

with the Point ▼ button.

POINT ▲▼ buttons

KEYSTONE button

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control or on the top control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

•The adjustable range is limited depending on the input signal.

Top Control

POINT ▲▼ buttons KEYSTONE button

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Network Supported Multimedia ProjectorFeatures and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom  Kensington Security Slot Part Names and FunctionsFront Side ① LAN Connection Terminal Part Names and Functions Side TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Menu button Image button Remote Control Operating RangeRemote Control Code Two AAA size batteriesPositioning the Projector InstallationAdjustable Feet Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment For the U..S..A.. and Canada Installation Connecting the AC Power CordProjector side AC outlet side For Continental Europe For the U..KSelected Input Source and Lamp Control Input signal guidance windowBasic Operation Turning On the ProjectorPIN Code Input Dialog Box Basic OperationDirect OFF Function Basic Operation Turning Off the ProjectorOn-Screen Menu Basic Operation How to Operate the On-Screen MenuRemote Control Top ControlBasic Operation Main Menu Keystone Correction Basic Operation Focus AdjustmentAuto Setup Function Mute Basic Operation Sound AdjustmentVolume Volume Dialog BoxBasic Operation Remote Control Operation Screen button Timer buttonNo Show button Image buttonInput Menu Computer InputInput Source Selection Computer 1 RGB Video Computer Input Input Source Selection Computer 2 RGBInput Menu Computer 2 button Computer 2 RGBMode Computer Input Computer System SelectionPC System Menu AutoAuto PC adj Computer Input Auto PC adjustmentPC adjust Menu To store adjustment parametersComputer Input Manual PC adjustment Store Menu Mode free MenuComputer Input Computer Input Image Mode Selection Image adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentCustom adj.. Menu Note Custom adjDigital zoom + Digital zoomVideo button Video button S-video Video InputInput Source Selection Video, S-video VideoVideo Input Input Source Selection Component, Scart , Hdmi Or Computer 1Component and then press Video Input Video System SelectionAV System Menu Video or S-video AV System Menu ComponentVideo Input Image Mode Selection Tint Video Input Image AdjustmentImage adjust Menu ColorNoise reduction Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Natural wide Video Input Screen Size AdjustmentZoom WideLanguage SettingSetting Setting Menu Language MenuInput search Auto setupAuto setup Background Power off? p.20Timer KeystoneLogo select Logo Logo and Logo PIN code lock settingsDefault Logo selectOff Logo PIN code lock Capture Logo PIN code lockCapture Logo PIN code change Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code change Enter a Logo PIN codeCeiling Rear Hdmi setupPower management Power managementStandby mode Count down Min . Only set to Count down , Timer isDirect on NoteFrom Color to White Note Closed captionOff , CC1 , CC2 , CC3 or CC4 To change the code for the projector Remote controlLamp control Security Key lock and PIN code lock Enter a PIN code Change the PIN code Lamp counter Video delay controlFan Fan controlFilter counter Factory defaultFactory default Filter counterInput Source Information Display InformationNote Then check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Reset? Maintenance and Cleaning Replacing the FilterResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CoverCleaning the Projection Lens Top Panel Maintenance and Cleaning Lamp ReplacementReset the lamp counter Service Parts No 349Lamp replacement counter Reset? appears Maintenance and Cleaning Resetting the Lamp CounterPress Select button. Lamp replacement counter Appendix TroubleshootingColor is strange AppendixNo image No soundPIN code dialog box appears Remote Control doesIndicator blinks or lights Image is distorted or runs offAppendix Menu Tree Information SettingIndicators Appendix Indicators and Projector Condition Note Appendix Compatible Computer SpecificationsFreq Technical Specifications Appendix Optional Parts Terminal Panel ReplacementHdmi 19 PIN Type a Appendix Configurations of TerminalsControl Port Connector D-sub 9 pin Terminal Analog RGB Mini D-sub 15 pinAttatching the Cable Holder Appendix PIN Code Number MemoPIN Code Lock No Logo PIN Code Lock NoPJ Link Notice Appendix DimensionsKJ8AH

PLC-WL2503A specifications

The Sanyo PLC-WL2503A is a cutting-edge projector designed to cater to the diverse needs of both professional and educational environments. With its compact design and advanced features, it stands out as a reliable option for users seeking high-quality visual performance.

One of the main features of the PLC-WL2503A is its impressive brightness output, reaching up to 2500 lumens. This high brightness level ensures that presentations and videos remain clear and vibrant even in well-lit environments. Coupled with a native XGA (1024 x 768) resolution, the projector delivers sharp and detailed images that enhance the professional look of any presentation.

The PLC-WL2503A utilizes advanced DLP (Digital Light Processing) technology, which provides exceptional color accuracy and consistency. This technology is known for its ability to produce vivid colors and deep blacks, making it an excellent choice for video playback and graphic presentations. Additionally, DLP technology allows for a longer lifespan of the projector's light source, resulting in reduced maintenance costs over time.

Another notable characteristic is the projector's versatility in connectivity options. The Sanyo PLC-WL2503A offers various input ports, including HDMI, VGA, and composite video, enabling easy connection to multiple devices such as laptops, DVD players, and gaming consoles. This flexibility ensures that users can seamlessly switch between different source devices without hassle.

In terms of usability, the PLC-WL2503A is designed with user-friendly features, including a straightforward interface and remote control. The integrated lens shift and keystone correction functionalities allow for easy adjustment of the image, enabling users to achieve optimal projection angles and alignment. This feature is especially beneficial in classroom and conference settings where space constraints can often pose challenges.

Furthermore, the projector boasts a lightweight and portable design, making it easy to transport to various locations. This is particularly advantageous for professionals who frequently travel for presentations or educational staff who move between classrooms.

The Sanyo PLC-WL2503A also incorporates eco-friendly technologies, such as an energy-saving mode that reduces power consumption while extending the life of the lamp. This focus on sustainability reflects a growing trend in technology to minimize environmental impact without compromising performance.

In conclusion, the Sanyo PLC-WL2503A combines impressive brightness, advanced DLP technology, versatile connectivity, and user-friendly features, making it an excellent choice for users in need of a reliable and efficient projector. Whether for business presentations or educational purposes, the PLC-WL2503A stands out as a powerful tool that delivers exceptional visual experiences.
Top Page Image Contents