Installation
Positioning the Projector
For the projector positioning, see the figures below.
The projector should be set perpendicularly to the plane of the screen.
Note:
•This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. •The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image.
•All measurements are approximate and may vary from the actual sizes.
3.927’ (119.7 cm)
(Inch Diagonal)
2.826’ (86.1 cm) |
|
|
| 110” | ||
|
|
|
|
|
| |
1.726’ (52.6 cm) |
|
|
|
| ||
80” | ||||||
|
| |||||
50”
A
Screen Size | 50” | 80” | 110” | |
(W x H) mm |
|
|
| |
1077 x 673 | 1723 x 1077 | 2369 x 1481 | ||
16:10aspect ratio | ||||
|
|
|
| |
Throw distance | 1.726’ (52.6 cm) | 2.826’ (86.1 cm) | 3.927’(119.7 cm) | |
|
|
|
| |
A | 0.623’ (19.0 cm) | 0.846’ (25.8 cm) | 1.069’ (32.6 cm) | |
|
|
|
|
Adjustable Feet
Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.
1 | Lift the front of the projector and pull the feet lock latches |
2 | on both sides of the projector upward. |
Release the feet lock latches to lock the adjustable feet | |
| and rotate the adjustable feet to adjust the position and |
| tilt. |
3 | To retract the adjustable feet, lift the front of the projector |
| and pull and undo the feet lock latches. |
Keystone distortion of the projected image can be corrected by remote control operation or menu operation (pp.22, 41).
Feet Lock Latches
Adjustable Feet
13