Sanyo PLC-WXE45 owner manual Basic Operation Turning Off the Projector

Page 19

Basic Operation

Turning Off the Projector

1

Press the POWER ON/STAND-BY button on the

 

remote control, and “Power off?” appears on the

 

screen.

2

Press the POWER ON/STAND-BY button again to turn

 

off the projector. The POWER indicator starts to blink

 

red, and the cooling fans keep running. (You can select

 

the level of the fans’ quietness and running speed. See

 

page 49.) At this time you can unplug the AC power

 

cord even if the fans are still running.

3

When the projector has cooled down enough to be

 

turned on again, the POWER indicator stops blinking.

TO MAINTAIN THE LAMP LIFE, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

Note:

•When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord to an AC outlet (p. 46).

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or emits a red light, see “Warning Indicator” on page 54.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power-off.

Power off?

“Power off” disappears after 4 seconds.

19

Image 19
Contents Network Supported Model PLC-WXE45Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Installing the Projector in Proper Position Safety Instructions Air CirculationMoving the Projector Compliance AC Power Cord RequirementAC Power Cord for the United States and Canada AC Power Cord for the United Kingdom⑤ Exhaust Vents Part Names and Functions③ LAN Connection Terminal Part Names and Functions Rear TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Operating Range Part Names and Functions Remote Control Battery InstallationAdjustable Feet InstallationPositioning the Projector Cables used for connection Installation Connecting to a ComputerAudio Video Installation Connecting to Video EquipmentInstallation Connecting to Component Video Equipment Projector side AC outlet side Installation Connecting the AC Power CordEnter a PIN code What is PIN code?Basic Operation Turning On the ProjectorBasic Operation Turning Off the Projector Remote Control Menu button Point buttons Select button Basic Operation How to Operate the On-Screen MenuOn-Screen Menu For computer source Basic Operation Menu BarFor video source Remote Control Basic Operation Focus AdjustmentKeystone Correction Freeze button Basic Operation Sound AdjustmentRemote Control Operation COMPUTER/VIDEO buttonBasic Operation Source Select Menu Computer InputInput Source Selection Input MenuMode Computer Input Computer System SelectionAuto PC System MenuPC Adjust Menu Computer Input Auto PC AdjustmentDirect Operation Remote Control To store the adjusted parametersComputer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection Computer Input Image Level Adjustment Full Screen Size AdjustmentNormal TrueFor zooming in and out the images Digital zoom + CustomDigital zoom Source Select Menu Video Menu Operation Remote ControlVideo Input Input Source Selection Video, S-videoPointer to Computer 1 and then press the Select AV System Menu Video or S-video Video Input Video System SelectionVideo or S-video Auto Component AutoCinema Video Input Image Level SelectionColor Video Input Image Level AdjustmentTint Noise reduction Video InputProgressive Natural wide Video Input Screen Size AdjustmentZoom WideSetting SettingLogo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureChange the Logo PIN code Enter a Logo PIN codeLogo PIN code lock Terminal CeilingRear Screen aspectPower management Standby modeLamp control To change the code for the remote controlOn start Remote control On startPIN code lock Change the PIN code lock settingSecurity Alarm and PIN code lock settings Change the PIN code lock settingChange the PIN code Change the PIN codeLamp counter Filter counterFan Fan controlSettin Set the alarm Antitheft Alarm FunctionInstall a battery Set and release the Antitheft alarm functionChange the PIN code Antitheft Alarm FunctionSettings Reset the settingsHow to install the battery Projector is shut down and the Warning Maintenance and CleaningIndicator is blinking red Indicator lights redResetting the Filter Counter Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Maintenance and Cleaning Attaching the Lens CoverCleaning the Projector Cabinet Reset the lamp replacement counter Maintenance and Cleaning Lamp ReplacementMaintenance and Cleaning Lamp Replacement Counter Lamp Handling PrecautionsAppendix TroubleshootingAppendix Indicator blinks or lights Computer Input Appendix Menu TreeSound Computer Input/Video InputSystem AutoSetting Video Input SettingProjector Condition Appendix Indicators and Projector ConditionDisplay Appendix Compatible Computer SpecificationsAppendix Technical Specifications Accessories DimensionsOptional Parts Appendix PJ Link Notice Service Port Connector Terminal Mini DIN 8-PIN Appendix Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Logo PIN Code Lock No Alarm PIN Code NoAppendix PIN Code Number Memo PIN Code Lock NoKM5AC