Sanyo PLC-WXE45 Maintenance and Cleaning Cleaning the Air Filters, Resetting the Filter Counter

Page 55

Maintenance and Cleaning

Cleaning the Air Filters

Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters become clogged with dust particles, they will reduce cooling fans’ effectiveness and may result in a buildup of internal heat and adversely affect the life of the projector. Clean the air filters by following the steps below.

1

Turn off the projector, and unplug the AC power cord

2

from the AC outlet.

Turn over the projector and remove the air filters by

3

pulling the latches upward.

Clean the air filters with a brush or rinse them softly.

4

When rinsing the air filters, dry them well.

Replace the air filters properly. Make sure that the air

 

filters are fully inserted.

CAUTION

Do not operate the projector with the air filters removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air intake vents. Otherwise it may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality.

When you use the projector under dusty or smoky conditions, dust may accumulate on the lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image.

When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Air filters

Pull up and remove.

Note:

When reinserting the air filters, be sure that the slit part is facing the outer side.

Resetting the Filter Counter

Be sure to reset the Filter counter after cleaning or replacing the filters.

1

Press the MENU button to display the On-Screen

Filter counter

Menu. Use the Point ◄► buttons to move the red

 

 

frame pointer to the Setting Menu icon.

 

2

Use the Point ▲▼ buttons to move the red frame

 

pointer to Filter counter and then press the SELECT

 

 

button. A dialog box appears showing the total

 

 

accumulated time of the filter use, a timer setting

 

 

option, and the reset option. Select Reset and the

 

 

“Filter counter Reset?” appears. Select [Yes] to

 

 

continue.

 

3

Another confirmation dialog box appears, select [Yes]

 

to reset the Filter counter.

 

Select Reset and the “Filter counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Filter counter.

55

Image 55
Contents Network Supported Model PLC-WXE45Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Installing the Projector in Proper Position Safety Instructions Air CirculationMoving the Projector Compliance AC Power Cord RequirementAC Power Cord for the United States and Canada AC Power Cord for the United Kingdom⑤ Exhaust Vents Part Names and Functions③ LAN Connection Terminal Part Names and Functions Rear TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Operating Range Part Names and Functions Remote Control Battery InstallationAdjustable Feet InstallationPositioning the Projector Cables used for connection Installation Connecting to a ComputerAudio Video Installation Connecting to Video EquipmentInstallation Connecting to Component Video Equipment Projector side AC outlet side Installation Connecting the AC Power CordEnter a PIN code What is PIN code?Basic Operation Turning On the ProjectorBasic Operation Turning Off the Projector Remote Control Menu button Point buttons Select button Basic Operation How to Operate the On-Screen MenuOn-Screen Menu For computer source Basic Operation Menu BarFor video source Remote Control Basic Operation Focus AdjustmentKeystone Correction Freeze button Basic Operation Sound AdjustmentRemote Control Operation COMPUTER/VIDEO buttonBasic Operation Source Select Menu Computer InputInput Source Selection Input MenuMode Computer Input Computer System SelectionAuto PC System MenuPC Adjust Menu Computer Input Auto PC AdjustmentDirect Operation Remote Control To store the adjusted parametersComputer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection Computer Input Image Level Adjustment Full Screen Size AdjustmentNormal TrueFor zooming in and out the images Digital zoom + CustomDigital zoom Source Select Menu Video Menu Operation Remote ControlVideo Input Input Source Selection Video, S-videoPointer to Computer 1 and then press the Select AV System Menu Video or S-video Video Input Video System SelectionVideo or S-video Auto Component AutoCinema Video Input Image Level SelectionColor Video Input Image Level AdjustmentTint Noise reduction Video InputProgressive Natural wide Video Input Screen Size AdjustmentZoom WideSetting SettingLogo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureChange the Logo PIN code Enter a Logo PIN codeLogo PIN code lock Terminal CeilingRear Screen aspectPower management Standby modeLamp control To change the code for the remote controlOn start Remote control On startPIN code lock Change the PIN code lock settingSecurity Alarm and PIN code lock settings Change the PIN code lock settingChange the PIN code Change the PIN codeLamp counter Filter counterFan Fan controlSettin Set the alarm Antitheft Alarm FunctionInstall a battery Set and release the Antitheft alarm functionChange the PIN code Antitheft Alarm FunctionSettings Reset the settingsHow to install the battery Projector is shut down and the Warning Maintenance and CleaningIndicator is blinking red Indicator lights redResetting the Filter Counter Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Maintenance and Cleaning Attaching the Lens CoverCleaning the Projector Cabinet Reset the lamp replacement counter Maintenance and Cleaning Lamp ReplacementMaintenance and Cleaning Lamp Replacement Counter Lamp Handling PrecautionsAppendix TroubleshootingAppendix Indicator blinks or lights Computer Input Appendix Menu TreeSound Computer Input/Video InputSystem AutoSetting Video Input SettingProjector Condition Appendix Indicators and Projector ConditionDisplay Appendix Compatible Computer SpecificationsAppendix Technical Specifications Accessories DimensionsOptional Parts Appendix PJ Link Notice Service Port Connector Terminal Mini DIN 8-PIN Appendix Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Logo PIN Code Lock No Alarm PIN Code NoAppendix PIN Code Number Memo PIN Code Lock NoKM5AC