Sanyo PLC-WXE45 owner manual Filter counter, Fan control, Lamp counter

Page 49

Setting

Fan

This function provides the following options in the cooling fans’ operation after turning off the projector (p.19).

L1 …… Normal operation

L2 …… Slower and lower-sound than the normal

operation (L1), but it takes longer to cool down the projector.

Fan control

Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector.

Off............ Normal speed. Set this function to “Off”

when using the projector in non-high altitude environment.

On 1......... Faster than Off mode. Select this mode when

using the projector in high altitudes (about 1,200 meters or more above the sea level) where the fans have less cooling effect.

On 2......... Faster than On 1 mode. Select this mode

when using the projector in higher altitudes than above where the fans have lesser cooling effect.

Lamp counter

This function is used to reset the lamp replacement counter. When replacing the projection lamp, reset the lamp replacement counter by using this function. See page 58 for operation.

Filter counter

This function is used to set a frequency for the filter cleaning.

When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.

For details about resetting the timer, refer to “Resetting the Filter Counter” on page 55.

Filter counter

Use the Point ◄► buttons to set the timer. Select from (Off/100H/ 200H/ 300H) depending on the use environment.

Note:

Setting “Fan control” to On1 or On2 affects L2 operation in “Fan.”

Note:

Fan noise becomes louder in On 1 and On2.

Failure to set the running speed of cooling fans properly may affect the projector life.

Lamp replacement icon

This icon appears on the screen when the end of lamp life is reached.

Note:

This icon also appears at turning on and selecting input source.

Fig.1 Filter warning icon

Filter warning icon appears on the screen at a set time.

Note:

This icon also appears at turning on.

Fig.2 Filter warning icon

Note:

At selecting input source, the icon (Fig.2) will appear.

The Filter warning icons (Fig.1 and Fig.2) will not appear when the Display function is set to “Off” (p.41), during “Freeze”(p.23), or "No show" (p.24).

49

Image 49
Contents Network Supported Model PLC-WXE45Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Installing the Projector in Proper Position Safety Instructions Air CirculationMoving the Projector AC Power Cord for the United States and Canada AC Power Cord RequirementAC Power Cord for the United Kingdom Compliance⑤ Exhaust Vents Part Names and Functions③ LAN Connection Terminal Part Names and Functions Rear TerminalPart Names and Functions Top Panel Part Names and Functions Remote Control Operating Range Part Names and Functions Remote Control Battery InstallationAdjustable Feet InstallationPositioning the Projector Cables used for connection Installation Connecting to a ComputerAudio Video Installation Connecting to Video EquipmentInstallation Connecting to Component Video Equipment Projector side AC outlet side Installation Connecting the AC Power CordBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeBasic Operation Turning Off the Projector Remote Control Menu button Point buttons Select button Basic Operation How to Operate the On-Screen MenuOn-Screen Menu For computer source Basic Operation Menu BarFor video source Remote Control Basic Operation Focus AdjustmentKeystone Correction Remote Control Operation Basic Operation Sound AdjustmentCOMPUTER/VIDEO button Freeze buttonBasic Operation Input Source Selection Computer InputInput Menu Source Select MenuAuto Computer Input Computer System SelectionPC System Menu ModeDirect Operation Remote Control Computer Input Auto PC AdjustmentTo store the adjusted parameters PC Adjust MenuComputer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection Computer Input Image Level Adjustment Normal Screen Size AdjustmentTrue FullFor zooming in and out the images Digital zoom + CustomDigital zoom Video Input Menu Operation Remote ControlInput Source Selection Video, S-video Source Select Menu VideoPointer to Computer 1 and then press the Select Video or S-video Auto Video Input Video System SelectionComponent Auto AV System Menu Video or S-videoCinema Video Input Image Level SelectionColor Video Input Image Level AdjustmentTint Noise reduction Video InputProgressive Zoom Video Input Screen Size AdjustmentWide Natural wideSetting SettingLogo select Logo Logo and Logo PIN code lock settingsCapture Logo select CaptureChange the Logo PIN code Enter a Logo PIN codeLogo PIN code lock Rear CeilingScreen aspect TerminalPower management Standby modeOn start Remote control To change the code for the remote controlOn start Lamp controlSecurity Alarm and PIN code lock settings Change the PIN code lock settingChange the PIN code lock setting PIN code lockChange the PIN code Change the PIN codeFan Filter counterFan control Lamp counterSettin Install a battery Antitheft Alarm FunctionSet and release the Antitheft alarm function Set the alarmSettings Antitheft Alarm FunctionReset the settings Change the PIN codeHow to install the battery Indicator is blinking red Maintenance and CleaningIndicator lights red Projector is shut down and the WarningResetting the Filter Counter Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Maintenance and Cleaning Attaching the Lens CoverCleaning the Projector Cabinet Reset the lamp replacement counter Maintenance and Cleaning Lamp ReplacementMaintenance and Cleaning Lamp Replacement Counter Lamp Handling PrecautionsAppendix TroubleshootingAppendix Indicator blinks or lights Sound Appendix Menu TreeComputer Input/Video Input Computer InputSystem AutoSetting Video Input SettingProjector Condition Appendix Indicators and Projector ConditionDisplay Appendix Compatible Computer SpecificationsAppendix Technical Specifications Accessories DimensionsOptional Parts Appendix PJ Link Notice Service Port Connector Terminal Mini DIN 8-PIN Appendix Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Appendix PIN Code Number Memo Alarm PIN Code NoPIN Code Lock No Logo PIN Code Lock NoKM5AC