Kodak i800 Series manual Enable scanning, Initiate polling, Feed documents

Page 9

3. Determine if any changes to the Image Processing parameters need to be made for the current application.

NOTE: This check needs to occur for up to four separate images from the six available options depending on your application: Front Color, Front Bi-tonal, Front Grayscale, Rear Color, Rear Bi-tonal, Rear Grayscale.

Image Processing parameter changes remain in effect until one of the following conditions occur:

• The scanner is powered down using the power switch.

• A SCSI bus device Reset command is executed.

• New imaging parameters are sent from the host.

	4. It is recommended that you calibrate the scanner. For
	procedures on how to do this, see the Kodak i800 Series
	Scanners, User’s Guide.
	5. Prepare documents according to the instructions found in the
	Kodak i800 Series Scanners, User’s Guide.
Enable scanning	The host must issue a Scan command to enable scanning before
	documents can be transported through the scanner. If scanning has
	not been enabled, the feeder and transport system will not turn on.
Initiate polling	Initiate host system polling of the scanner to ensure scanned
	document images are transferred from the image buffer to the host
	system. Polling should continue until scanning is disabled.
	For more information see the sections entitled, “Controlling
	image transfer order” and “Image header information” later in this
	chapter.
Feed documents	Feed documents according to the instructions found in the Kodak
	i800 Series Scanners, User's Guide.

A-61510 January 2005

2-3

Image 9

Contents User’s Guide Page Kodak i800 Series Scanners IntroductionJanuary Image outputs FG.jpg front FB.tif front RB.tif rearGrayscale Bi-tonal/binary Basic image capture Best PracticesScanner setup Enable scanning Initiate pollingFeed documents Error handling Disable scanningJanuary Bi-tonal only duplex Color only duplex Controlling image transfer orderJanuary January January January Image file storage locations Bar code recognition Image address format Image addressingStarting image address Next image addressSingle level indexing Indexing schemesTwo level indexing Two level offset indexing Three level indexing January Three level offset indexing Controlling document level changes Generated Automatically Level rules Print String formatting Controlling print strings Electronic color dropoutContrast% = Threshold = Color Filter = Resolution = 200 dpiRed Dropout  Complete Dropout Red dropoutRed Dropout  Near Complete Dropout Green Dropout  Complete DropoutGreen Dropout  Near Complete Dropout Blue Dropout  Complete DropoutBlue Dropout  Near Complete Dropout Image header information January January Original Bi-tonal image Relative Cropping Zone processingJanuary Programmable keys Types of Patch Codes Patch ReadingType 3 Patch Code Type 2 Patch CodeTransfer Patch Code Toggle PatchAdditional Patch Codes Batching Using the Twain Data Source January Button Description Scan Validation Tool dialog boxKodak Scanner Properties dialog box Buttons on the Kodak Scanner Properties dialog box Imaging tab January Disabled No Noise Filter Used Contrast Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast Black on White polarity Color January Color Paper tab Relative to Document zone processing used for batches Cropping valuesOriginal Bi-tonal image Relative Cropping Overscan values Compression tab allows you to compress image files Compression tabGood, Better, Best, Superior Green, Remove Blue, Remove Red Dropout tabJanuary January Image Address area Image Address TemplateArea Level to Follow Level Rules Batch Control area Batch tabPatch Patch Control areaPatch 3 assigns a Level 3 to the current document Button Control area Multifeed tab January Options tab January Printer tab Print Template setupFollowing information can be printed Print StringJanuary Printing orientation Horizontal Print Position Setup tab Info tab Using the Isis Driver January Scan Validation Tool dialog box Opens the image viewer to display one image at a Scanner Settings dialog box Enabled and Selected Copy Buttons on the Scanner Settings dialog boxCamera settings area Binary Image Processing settingsOnly Size and layoutFixed thresholding ATP disabled January Original Binary image Relative Cropping Automatic  not available for i800 Series Scanners Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast More Scanner Settings dialog box Camera settings area Image Control options Good, Better, Best, Superior and SharpenBlack on White polarity Noise Filter Buttons on the Scanner Settings dialog box Controls Setting scannerJanuary January January Enabling and setting Document Printer options Print String Formatting characters Counter Text Options − Direction Up or Down Setting Color Dropout values January Defining Batch Patch Code Definition ValuesBatching is the operation of counting pages or documents Codes box Enabling Patch CodesPatch Image addressing provides better document management Image Address fields January Defining the Scan Area January Appendix a High Volume Scanner Comparison Table Eastman Kodak Company

Related manuals

Manual 83 pages 52.33 Kb