Kodak i800 Series manual Level to Follow Level Rules

Page 66

For each field, use the Field Guide to assign the purpose of the field and its width. In the example below, Field A is defined as a 5-character fixed field. Field B is defined as a 4-character level 3 field. Field C is defined as a 3-character level 2 field, and Field D is defined as a 2-character level 1 field.

Level to Follow Level Rules

These are the rules the scanner will follow to set the next image address level if there are no other inputs. For example, patch sheet or end of batch processing. You will have to define a level to follow level for each of the level fields you defined in your image address template area.

Presets  this drop-down menu may be used to suggest image address formats. Each selection will automatically fill in the fields line. These reflect traditional microfilming schemes and the widths follow the i800 image addressing rules. You may change the field widths any way you choose as long as you do not exceed the 9-character field width maximum and 27 total.

Image Address Format  the image address can be printed on the original documents as they are transported through the system. You can define the format in which the image address is printed. Choose from one of the following formats:

•Display leading zeros format (e.g., 004.003.002.001)

•Suppress leading zeros format (e.g., 004. 3. 2. 1)

•Compress leading zeros format (e.g., 004.3.2.1)

Check Digit  this option will only be displayed if the scanner is configured with a Check Digit alteration file.

A-61510 January 2005

3-26

Image 66

Contents User’s Guide Page Introduction Kodak i800 Series ScannersJanuary Image outputs FG.jpg front FB.tif front RB.tif rearGrayscale Bi-tonal/binary Best Practices Basic image captureScanner setup Enable scanning Initiate pollingFeed documents Disable scanning Error handlingJanuary Controlling image transfer order Bi-tonal only duplex Color only duplexJanuary January January January Image file storage locations Bar code recognition Starting image address Image addressingImage address format Next image addressIndexing schemes Single level indexingTwo level indexing Two level offset indexing Three level indexing January Three level offset indexing Controlling document level changes Generated Automatically Level rules Controlling print strings Electronic color dropout Print String formattingResolution = 200 dpi Contrast% = Threshold = Color Filter =Red Dropout  Near Complete Dropout Red dropoutRed Dropout  Complete Dropout Green Dropout  Complete DropoutGreen Dropout  Near Complete Dropout Blue Dropout  Complete DropoutBlue Dropout  Near Complete Dropout Image header information January January Zone processing Original Bi-tonal image Relative CroppingJanuary Programmable keys Type 3 Patch Code Patch ReadingTypes of Patch Codes Type 2 Patch CodeTransfer Patch Code Toggle PatchAdditional Patch Codes Batching Using the Twain Data Source January Scan Validation Tool dialog box Button DescriptionKodak Scanner Properties dialog box Buttons on the Kodak Scanner Properties dialog box Imaging tab January Disabled No Noise Filter Used Contrast Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast Black on White polarity Color January Color Paper tab Cropping values Relative to Document zone processing used for batchesOriginal Bi-tonal image Relative Cropping Overscan values Compression tab Compression tab allows you to compress image filesGood, Better, Best, Superior Dropout tab Green, Remove Blue, Remove RedJanuary January Image Address area Image Address TemplateArea Level to Follow Level Rules Batch tab Batch Control areaPatch Control area PatchPatch 3 assigns a Level 3 to the current document Button Control area Multifeed tab January Options tab January Print Template setup Printer tabPrint String Following information can be printedJanuary Printing orientation Horizontal Print Position Setup tab Info tab Using the Isis Driver January Scan Validation Tool dialog box Opens the image viewer to display one image at a Scanner Settings dialog box Buttons on the Scanner Settings dialog box Enabled and Selected CopyCamera settings area Image Processing settings BinarySize and layout OnlyFixed thresholding ATP disabled January Original Binary image Relative Cropping Automatic  not available for i800 Series Scanners Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast More Scanner Settings dialog box Camera settings area Good, Better, Best, Superior and Sharpen Image Control optionsBlack on White polarity Noise Filter Buttons on the Scanner Settings dialog box Setting scanner ControlsJanuary January January Enabling and setting Document Printer options Print String Formatting characters Counter Text Options − Direction Up or Down Setting Color Dropout values January Defining Batch Patch Code Definition ValuesBatching is the operation of counting pages or documents Enabling Patch Codes Codes boxPatch Image addressing provides better document management Image Address fields January Defining the Scan Area January Appendix a High Volume Scanner Comparison Table Eastman Kodak Company

Related manuals

Manual 83 pages 52.33 Kb