Kodak i800 Series manual Image Address area, Image Address Template, Area

Page 65

Image Address area	The Image Address area allows you to enter a starting image address.
	Current value  displays the next image address which will be used if
	no value is entered in the image address field.
	Image Address  an image address is a unique identifier assigned to
	each individual document and may contain up to 30 characters
	consisting of a maximum of 27 digits and 3 delimiters. The structure of
	this field must match the format defined in the Image Address Template
	fields. This value is used by the scanner as the next image address
	which is assigned to the next document which enters the transport. This
	is also referred to as the Starting Image Address.
	Document Count  this value is used to assign the document count for
	the next document entering the transport and is incremented
	sequentially by the scanner unless another document count is received
	from the host. This value is returned in the image header. The format of
	this counter is defined on the Printer tab in the Counter field.
Image Address Template	The Image Address Template area allows you to define an image
area	address area or choose an existing template.
	Image Address Template area  up to four fields can be defined.
	Each field may be a maximum of 9 characters. The total image address
	cannot exceed 27 characters (30 with 3 delimiters). The i800 Series
	Scanners have more options available for image addressing schemes
	with the following guidelines:
	You may define from 0 to 4 fixed fields.
	Only one field may be assigned to a level. You are only allowed one level
	1 field, one level 2 field, and one level 3 field.
	There is no requirement to have any level field.

A-61510 January 2005

3-25

Image 65

Contents User’s Guide Page Kodak i800 Series Scanners IntroductionJanuary Image outputs Grayscale Bi-tonal/binary FG.jpg front FB.tif frontRB.tif rear Basic image capture Best PracticesScanner setup Feed documents Enable scanningInitiate polling Error handling Disable scanningJanuary Bi-tonal only duplex Color only duplex Controlling image transfer orderJanuary January January January Image file storage locations Bar code recognition Image address format Image addressingStarting image address Next image addressSingle level indexing Indexing schemesTwo level indexing Two level offset indexing Three level indexing January Three level offset indexing Controlling document level changes Generated Automatically Level rules Print String formatting Controlling print strings Electronic color dropoutContrast% = Threshold = Color Filter = Resolution = 200 dpiRed Dropout  Complete Dropout Red dropoutRed Dropout  Near Complete Dropout Green Dropout  Complete DropoutBlue Dropout  Near Complete Dropout Green Dropout  Near Complete DropoutBlue Dropout  Complete Dropout Image header information January January Original Bi-tonal image Relative Cropping Zone processingJanuary Programmable keys Types of Patch Codes Patch ReadingType 3 Patch Code Type 2 Patch CodeAdditional Patch Codes Transfer Patch CodeToggle Patch Batching Using the Twain Data Source January Button Description Scan Validation Tool dialog boxKodak Scanner Properties dialog box Buttons on the Kodak Scanner Properties dialog box Imaging tab January Disabled No Noise Filter Used Contrast Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast Black on White polarity Color January Color Paper tab Relative to Document zone processing used for batches Cropping valuesOriginal Bi-tonal image Relative Cropping Overscan values Compression tab allows you to compress image files Compression tabGood, Better, Best, Superior Green, Remove Blue, Remove Red Dropout tabJanuary January Area Image Address areaImage Address Template Level to Follow Level Rules Batch Control area Batch tabPatch Patch Control areaPatch 3 assigns a Level 3 to the current document Button Control area Multifeed tab January Options tab January Printer tab Print Template setupFollowing information can be printed Print StringJanuary Printing orientation Horizontal Print Position Setup tab Info tab Using the Isis Driver January Scan Validation Tool dialog box Opens the image viewer to display one image at a Scanner Settings dialog box Enabled and Selected Copy Buttons on the Scanner Settings dialog boxCamera settings area Binary Image Processing settingsOnly Size and layoutFixed thresholding ATP disabled January Original Binary image Relative Cropping Automatic  not available for i800 Series Scanners Dpi 80 Threshold 20 Contrast Dpi 80 Threshold 100 Contrast More Scanner Settings dialog box Camera settings area Image Control options Good, Better, Best, Superior and SharpenBlack on White polarity Noise Filter Buttons on the Scanner Settings dialog box Controls Setting scannerJanuary January January Enabling and setting Document Printer options Print String Formatting characters Counter Text Options − Direction Up or Down Setting Color Dropout values January Batching is the operation of counting pages or documents Defining BatchPatch Code Definition Values Codes box Enabling Patch CodesPatch Image addressing provides better document management Image Address fields January Defining the Scan Area January Appendix a High Volume Scanner Comparison Table Eastman Kodak Company

Related manuals

Manual 83 pages 52.33 Kb