Kodak DP2900 manual Connecting with an S-video cable

Page 21

Setting up the Projector

Connecting with an S-video cable:

inin

	audio	S-video
	adapter
		cable

audio cable

3.Plug the audio adapter’s white connector into the left “audio out” connector on your video source. Plug the adapter’s red connector into the right “audio out” connector on the video source.

4.Plug the audio adapter’s white connector into the left “audio out” connector on your video source. Plug the adapter’s red connector into the right “audio out” connector on the video source. Plug the audio adapter’s other end into the audio cable.

5. Plug the audio cable into the “audio in”	connector on the
projector.

The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically adjusts to optimize its performance for the incoming video. The input signal for SECAM video is similar to other video signals and cannot be automatically detected, therefore SECAM must be chosen manually. See “Video Standard” on page 38 for details.

21

Image 21

Contents User Guide Kodak DP2900 Digital Projector Page Safety Certifications Page Table of Contents Appendix a Appendix B Safety Definitions Safety Symbols Safety InstructionsSafety Issues Important Operating Considerations Battery Use Page Image Resolution IntroductionCompatibility Unpacking the Projector Usage Guidelines Projector FeaturesOnline Services If You Need AssistanceFaxed Information Telephone Customer Support HK/PRC Positioning the Projector Setting up the ProjectorConnecting a Computer Connecting the ProjectorDo you want to play your computer’s audio on the projector? To connect to a video source Connecting a Video SourceConnecting with an S-video cable Surmhfwru Starting the ProjectorTurning Off the Projector Page Basic Image Adjustment Using the ProjectorAdjusting the Projector Using the Remote Control User Guide Kodak DP2900 Digital Projector Keypad Buttons Using the Keypad and Remote ButtonsLamp on/off keypad only MenuSource keypad only or Computer and Video Remote only Standby Volume keypad onlyUsing the On-Screen Menus Display Menu BrightnessContrast Tint Reset AllColor SharpnessAudio Menu VolumeImage Menu Keystone computer source onlyResize Auto ImageManual Tracking computer source only Manual Sync computer source onlyHorizontal position computer source only Vertical position computer source onlyVideo Standard Controls MenuStandby Time Rear ProjectionAuto Source Select Default SourcePlug and Play Display MessagesDisplay Startup Screen Language MenuStatus Menu Source Boot versionSoftware version Startup screen versionUsing Kodak Image Manager Page Cleaning the Lens Maintenance TroubleshootingUhjxodwlrqv Replacing the Projection LampSurmhfwruwrryhukhdw 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ Using the Security Lock Replacing the Batteries in the Remote ControlTroubleshooting Remote ControlSound Image Quality Settings work best if you select Lamp Image Source Appendix a SpecificationsOptics Appendix B Portable and Laptop Activation ChartAMS FN-F6 FN-F4 DEC FN-F3 FN-T NCR Key command Computer De-activate Activate port Port Key command Computer De-activate Activate port Port Page Appendix C Using Video Mirroring with a PowerBook ComputerUsing SimulScan Appendix D Projected Image SizeImage Size, Width and Height for DP2900 maximum image size Image Size, Width and Height for DP2900 minimum image size Index Keypad Index User Guide Kodak DP2900 Digital Projector Warranty Time Period WarrantyHOW to Obtain Service