Kodak DP2900 manual Safety Issues Important Operating Considerations

Page 8

User Guide KODAK DP2900 Digital Projector

Safety Issues

•Warning: Don’t look directly into the lens when the lamp is turned on.

•Warning: To replace the lamp, turn the projector off by unplugging the power cord. To avoid burns, wait 30 minutes before opening the lamp door. Follow all instructions provided in this User’s Guide.

•Warning: Please use the power cord provided. Connect the power cord to a receptacle with a protective safety (earth) ground terminal.

•Warning: Refer all service to qualified service personnel. Servicing your own projector will void the warranty. See the following page for the customer service contact information.

•Caution: Don’t block ventilation openings.

•Caution: Don’t set liquids on the projector. Spilled liquids may damage your projector.

•Caution: Don’t place the projector on a hot surface or in direct sunlight.

•Caution: Do not drop the projector. Transport the projector in an KODAK-approved case. For accessory information go to our Web site at www.kodak.com/go/projectors.

Important Operating Considerations

Do not place the projector on a tablecloth or other soft covering that may block the vents. In the unlikely event of the bulb rupturing, thoroughly clean the area behind the projector and discard any edible items placed in that area.

			m)
		.6
	(
t
f
2

Do not place objects in

this area behind the projector

viii

Image 8

Contents User Guide Kodak DP2900 Digital Projector Page Safety Certifications Page Table of Contents Appendix a Appendix B Safety Instructions Safety Definitions Safety SymbolsSafety Issues Important Operating Considerations Battery Use Page Compatibility Image ResolutionIntroduction Unpacking the Projector Projector Features Usage GuidelinesFaxed Information Online ServicesIf You Need Assistance Telephone Customer Support HK/PRC Setting up the Projector Positioning the ProjectorConnecting the Projector Connecting a ComputerDo you want to play your computer’s audio on the projector? Connecting a Video Source To connect to a video sourceConnecting with an S-video cable Starting the Projector SurmhfwruTurning Off the Projector Page Using the Projector Basic Image AdjustmentAdjusting the Projector Using the Remote Control User Guide Kodak DP2900 Digital Projector Using the Keypad and Remote Buttons Keypad ButtonsSource keypad only or Computer and Video Remote only Lamp on/off keypad onlyMenu Volume keypad only StandbyUsing the On-Screen Menus Contrast Display MenuBrightness Reset All TintColor SharpnessVolume Audio MenuImage Menu Keystone computer source onlyAuto Image ResizeManual Sync computer source only Manual Tracking computer source onlyHorizontal position computer source only Vertical position computer source onlyControls Menu Video StandardStandby Time Rear ProjectionDefault Source Auto Source SelectPlug and Play Display MessagesLanguage Menu Display Startup ScreenStatus Menu Boot version SourceSoftware version Startup screen versionUsing Kodak Image Manager Page Maintenance Troubleshooting Cleaning the LensReplacing the Projection Lamp UhjxodwlrqvSurmhfwruwrryhukhdw 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ Replacing the Batteries in the Remote Control Using the Security LockSound TroubleshootingRemote Control Image Quality Settings work best if you select Lamp Image Source Specifications Appendix aOptics Portable and Laptop Activation Chart Appendix BAMS FN-F6 FN-F4 DEC FN-F3 FN-T NCR Key command Computer De-activate Activate port Port Key command Computer De-activate Activate port Port Page Using Video Mirroring with a PowerBook Computer Appendix CUsing SimulScan Image Size, Width and Height for DP2900 maximum image size Appendix DProjected Image Size Image Size, Width and Height for DP2900 minimum image size Index Keypad Index User Guide Kodak DP2900 Digital Projector Warranty Warranty Time PeriodHOW to Obtain Service