Kodak DP2900 manual Settings work best if you select

Page 52

User Guide KODAK DP2900 Digital Projector

Problem	Solution


Image is "noisy" or streaked.	Try these steps in this order.
	1. Deactivate the screen saver on
	your computer.
	2. Turn Auto Image off and then
	back on again. See “Auto
	Image” on page 36.
	3. Turn Auto Image off and adjust
	the synchronization and
	tracking manually to find an
	optimal setting. See “Manual
	Sync (computer source only)”
	on page 37 and “Manual
	Tracking (computer source
	only)” on page 37.
	• Try connecting to another computer.
	The problem could be with your
	computer's video card.

Image is wider at the top or	This keystoning effect is caused by the
bottom of the screen.	projection angle not being perpendicular
	to the screen. Adjust the keystoning. See
	“Keystone (computer source only)” on
	page 35.

Image is wider at one side	Make sure the projector is at a 90 degree
than the other	angle to the screen.

Projected colors don't match	Use the KODAK Image Manager to
the computer or video source	select a setting that is more acceptable.
colors.	Important: The KODAK Image Manager
	settings work best if you select
	Reset from the Adjust Tab each
	time before selecting an Image
	Manager setting.
	If further adjustment is needed, optimize
	the brightness, tint, color and contrast
	from the Image Menu.

52

Image 52

Contents User Guide Kodak DP2900 Digital Projector Page Safety Certifications Page Table of Contents Appendix a Appendix B Safety Instructions Safety Definitions Safety SymbolsSafety Issues Important Operating Considerations Battery Use Page Introduction Image ResolutionCompatibility Unpacking the Projector Projector Features Usage GuidelinesIf You Need Assistance Online ServicesFaxed Information Telephone Customer Support HK/PRC Setting up the Projector Positioning the ProjectorConnecting the Projector Connecting a ComputerDo you want to play your computer’s audio on the projector? Connecting a Video Source To connect to a video sourceConnecting with an S-video cable Starting the Projector SurmhfwruTurning Off the Projector Page Using the Projector Basic Image AdjustmentAdjusting the Projector Using the Remote Control User Guide Kodak DP2900 Digital Projector Using the Keypad and Remote Buttons Keypad ButtonsMenu Lamp on/off keypad onlySource keypad only or Computer and Video Remote only Volume keypad only StandbyUsing the On-Screen Menus Brightness Display MenuContrast Reset All TintColor SharpnessVolume Audio MenuImage Menu Keystone computer source onlyAuto Image ResizeManual Sync computer source only Manual Tracking computer source onlyHorizontal position computer source only Vertical position computer source onlyControls Menu Video StandardStandby Time Rear ProjectionDefault Source Auto Source SelectPlug and Play Display MessagesLanguage Menu Display Startup ScreenStatus Menu Boot version SourceSoftware version Startup screen versionUsing Kodak Image Manager Page Maintenance Troubleshooting Cleaning the LensReplacing the Projection Lamp UhjxodwlrqvSurmhfwruwrryhukhdw 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ Replacing the Batteries in the Remote Control Using the Security LockRemote Control TroubleshootingSound Image Quality Settings work best if you select Lamp Image Source Specifications Appendix aOptics Portable and Laptop Activation Chart Appendix BAMS FN-F6 FN-F4 DEC FN-F3 FN-T NCR Key command Computer De-activate Activate port Port Key command Computer De-activate Activate port Port Page Using Video Mirroring with a PowerBook Computer Appendix CUsing SimulScan Projected Image Size Appendix DImage Size, Width and Height for DP2900 maximum image size Image Size, Width and Height for DP2900 minimum image size Index Keypad Index User Guide Kodak DP2900 Digital Projector Warranty Warranty Time PeriodHOW to Obtain Service