Kodak DP2900 manual Image Quality

			Maintenance & Troubleshooting
Image Quality
	Problem		Solution
	Color or text is not projected.	Adjust the brightness up or down until
		the text is visible.
	Some text or fonts are not	For optimal results, set the computer’s
	sharp with a computer as an	resolution to 1024 x 768. (Refer to your
	image source.	computer user manual.) It may be
		necessary to reduce the keystone
		correction for optimum results.
	Image isn't centered on the	•	Be sure that the projector is at a 90°
	screen.		angle to the screen.
		•	Use the software to reposition the
			image. “Horizontal position (computer
			source only)” on page 37 and “Vertical
			position (computer source only)” on
			page 37.
	Image is out of focus.	•	Turn the projection lens to focus the
			image.
		•	Make sure that the projection screen is
			at least 3 ft (.9 m) from the projector.
		•	Check the projection lens to see if it
			needs cleaning.
	Image and menus are	• If projecting from behind a screen,
	reversed from left to right.		make sure that Rear Projection is
			selected.
		• If projecting from in front of a screen,
			make sure that Front Projection is
			selected.
	Image appears flat with no	Adjust the contrast. See “Contrast” on
	contrast	page 33.
	Image appears washed out or	•	Check the projection lens to see if it
	dark.		needs cleaning.
		•	Adjust the brightness. See “Brightness”
			on page 33.

51