Kodak DP2900 manual Status Menu

Page 41

Using the Projector

Status Menu

This is a read-only window for informational purposes. To display the status window, select Show status from the menu, then click the left or right navigation button. To remove the window, click the left or right navigation button.

Display Audio Image Controls Language			Status

			> Show status

	Lamp hours used	0039
	Computer resolution		1024x768
	Horizontal refresh rate		60.03 KHz
	Vertical refresh rate		75.04 Hz
	Mute status		off
	Source		computer
	Software version	1.0
	Startup screen version	1.0
	Startup screen version	1.0
	Boot version	1.0

Lamp hours used

Indicates how many hours the current lamp has been in use. The counter starts at zero hours and counts each hour the lamp is in use. Change the bulb when the brightness is no longer acceptable. See “Replacing the Projection Lamp” on page 46 for details.

Computer resolution

Shows your computer’s resolution setting. To change this, go to your computer’s Control Panel and adjust the resolution in the Display tab. See your computer’s user’s guide for details.

Horizontal refresh rate

The time period that one horizontal line is displayed.

Vertical refresh rate

The time period that one video frame is displayed.

Mute status

Indicates if the audio is muted.

41

Image 41

Contents User Guide Kodak DP2900 Digital Projector Page Safety Certifications Page Table of Contents Appendix a Appendix B Safety Definitions Safety Symbols Safety InstructionsSafety Issues Important Operating Considerations Battery Use Page Compatibility Image ResolutionIntroduction Unpacking the Projector Usage Guidelines Projector FeaturesFaxed Information Online ServicesIf You Need Assistance Telephone Customer Support HK/PRC Positioning the Projector Setting up the ProjectorConnecting a Computer Connecting the ProjectorDo you want to play your computer’s audio on the projector? To connect to a video source Connecting a Video SourceConnecting with an S-video cable Surmhfwru Starting the ProjectorTurning Off the Projector Page Basic Image Adjustment Using the ProjectorAdjusting the Projector Using the Remote Control User Guide Kodak DP2900 Digital Projector Keypad Buttons Using the Keypad and Remote ButtonsSource keypad only or Computer and Video Remote only Lamp on/off keypad onlyMenu Standby Volume keypad onlyUsing the On-Screen Menus Contrast Display MenuBrightness Tint Reset AllColor SharpnessAudio Menu VolumeImage Menu Keystone computer source onlyResize Auto ImageManual Tracking computer source only Manual Sync computer source onlyHorizontal position computer source only Vertical position computer source onlyVideo Standard Controls MenuStandby Time Rear ProjectionAuto Source Select Default SourcePlug and Play Display MessagesDisplay Startup Screen Language MenuStatus Menu Source Boot versionSoftware version Startup screen versionUsing Kodak Image Manager Page Cleaning the Lens Maintenance TroubleshootingUhjxodwlrqv Replacing the Projection LampSurmhfwruwrryhukhdw 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ Using the Security Lock Replacing the Batteries in the Remote ControlSound TroubleshootingRemote Control Image Quality Settings work best if you select Lamp Image Source Appendix a SpecificationsOptics Appendix B Portable and Laptop Activation ChartAMS FN-F6 FN-F4 DEC FN-F3 FN-T NCR Key command Computer De-activate Activate port Port Key command Computer De-activate Activate port Port Page Appendix C Using Video Mirroring with a PowerBook ComputerUsing SimulScan Image Size, Width and Height for DP2900 maximum image size Appendix DProjected Image Size Image Size, Width and Height for DP2900 minimum image size Index Keypad Index User Guide Kodak DP2900 Digital Projector Warranty Time Period WarrantyHOW to Obtain Service