Maintenance & Troubleshooting
Replacing the Batteries in the Remote Control
The life of the batteries depends on how often and how long you use the remote. Symptoms of low battery charge include erratic responses when using the remote and a reduced range of operation.
Follow these steps to replace the batteries:
1.Turn the remote face down in your hand.
2.Slide the battery cover off the end of the remote.
3.Remove the old batteries and dispose of them in an environmentally proper manner.
4.Install two new AAA alkaline batteries. Make sure you install each in the correct direction.
5.Slide the battery cover back on the remote.
Using the Security Lock
The projector has a security connector for use with a PC Guardian Cable Lock System. (This Lock System must be purchased separately.) Refer to the information that came with the lock for instructions on how to use it to secure the projector.
49