Kodak DP2900 manual Using the Projector, Basic Image Adjustment

Page 25

Using the Projector

This section describes how to use and make adjustments to the projector. It also provides a reference to the keypad and remote buttons and the options available from the on-screen menus.

Basic Image Adjustment

•Make sure you have turned on your equipment in the right order (page 22).

•If the image doesn’t display completely, zoom the image (page 26), adjust the height of the projector (page 26) or center the image by adjusting its horizontal or vertical position (page 37). Be sure the projector is at a 90 degree angle to the screen.

•If the image is out of focus, rotate the focus lens (page 26).

•If the image appears to shimmer or if it has blurry vertical bars after you have adjusted the focus, turn Auto Image (page 36) off and then back on to reset the automatic sync and tracking. If that doesn’t clear up the image, turn Auto Image off and adjust the sync (page 37) and/or the tracking (page 37) manually.

•If the colors don’t look right, check the KODAK Image Manager

settings. See “Using KODAK Image Manager” on page 43.

,PSRUWDQW 7KH.2'$.,PDJH0DQDJHUVHWWLQJVZRUNEHVWLI\RXVHOHFW5HVHW IURPWKH$GMXVWWDEHDFKWLPHEHIRUHVHOHFWLQJDQ,PDJH0DQDJHU

VHWWLQJ

Or

Adjust the brightness (page 33) and the tint (page 34).

•If the computer source image is not rectangular, adjust the keystoning (page 35).

•If the edges of the video source image appear jagged, adjust the overscan (page 35).

25

Image 25

Contents User Guide Kodak DP2900 Digital Projector Page Safety Certifications Page Table of Contents Appendix a Appendix B Safety Definitions Safety Symbols Safety InstructionsSafety Issues Important Operating Considerations Battery Use Page Introduction Image ResolutionCompatibility Unpacking the Projector Usage Guidelines Projector FeaturesIf You Need Assistance Online ServicesFaxed Information Telephone Customer Support HK/PRC Positioning the Projector Setting up the ProjectorConnecting a Computer Connecting the ProjectorDo you want to play your computer’s audio on the projector? To connect to a video source Connecting a Video SourceConnecting with an S-video cable Surmhfwru Starting the ProjectorTurning Off the Projector Page Basic Image Adjustment Using the ProjectorAdjusting the Projector Using the Remote Control User Guide Kodak DP2900 Digital Projector Keypad Buttons Using the Keypad and Remote ButtonsMenu Lamp on/off keypad onlySource keypad only or Computer and Video Remote only Standby Volume keypad onlyUsing the On-Screen Menus Brightness Display MenuContrast Tint Reset AllColor SharpnessAudio Menu VolumeImage Menu Keystone computer source onlyResize Auto ImageManual Tracking computer source only Manual Sync computer source onlyHorizontal position computer source only Vertical position computer source onlyVideo Standard Controls MenuStandby Time Rear ProjectionAuto Source Select Default SourcePlug and Play Display MessagesDisplay Startup Screen Language MenuStatus Menu Source Boot versionSoftware version Startup screen versionUsing Kodak Image Manager Page Cleaning the Lens Maintenance TroubleshootingUhjxodwlrqv Replacing the Projection LampSurmhfwruwrryhukhdw 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ Using the Security Lock Replacing the Batteries in the Remote ControlRemote Control TroubleshootingSound Image Quality Settings work best if you select Lamp Image Source Appendix a SpecificationsOptics Appendix B Portable and Laptop Activation ChartAMS FN-F6 FN-F4 DEC FN-F3 FN-T NCR Key command Computer De-activate Activate port Port Key command Computer De-activate Activate port Port Page Appendix C Using Video Mirroring with a PowerBook ComputerUsing SimulScan Projected Image Size Appendix DImage Size, Width and Height for DP2900 maximum image size Image Size, Width and Height for DP2900 minimum image size Index Keypad Index User Guide Kodak DP2900 Digital Projector Warranty Time Period WarrantyHOW to Obtain Service