Kodak DP2900 manual Image Source

Page 54

User Guide KODAK DP2900 Digital Projector

Image Source

Problem		Cause and Solution


The S-Video image source	Some inexpensive cables are not
does not appear.	compatible with the projector. Be sure to
	use a high quality cable.

Only the start-up screen	•	Verify that the cables are connected
appears and not the image		correctly.
from the image source.	•	Verify that the proper image source is
		connected and that it is selected on the
		Setup tab of the menus.
	• Make sure that the image source is
		turned on.
	• Turn off everything and power up again
		in the proper order.
	•	Make sure that your laptop's external
		video port is turned on. See the
		computer manual for details.
	• Make sure your computer’s video board
		is installed and configured correctly.
	• Make sure your computer has a
		compatible video board. The projector
		isn’t CGA, EGA or SXGA compatible.
	• If you’re using Windows 98:
		1.Open “My Computer” icon, the
		Control Panel folder and then the
		Display icon.
		2.Click the Settings tab.
		3.Verify that the Desktop area is set to
		1024x768 or less.

No image is displayed	• Make sure that you have removed the
		lens cap.
	• Make sure that the lamp is switched on.

54

Image 54

Contents User Guide Kodak DP2900 Digital Projector Page Safety Certifications Page Table of Contents Appendix a Appendix B Safety Instructions Safety Definitions Safety SymbolsSafety Issues Important Operating Considerations Battery Use Page Image Resolution IntroductionCompatibility Unpacking the Projector Projector Features Usage GuidelinesOnline Services If You Need AssistanceFaxed Information Telephone Customer Support HK/PRC Setting up the Projector Positioning the ProjectorConnecting the Projector Connecting a ComputerDo you want to play your computer’s audio on the projector? Connecting a Video Source To connect to a video sourceConnecting with an S-video cable Starting the Projector SurmhfwruTurning Off the Projector Page Using the Projector Basic Image AdjustmentAdjusting the Projector Using the Remote Control User Guide Kodak DP2900 Digital Projector Using the Keypad and Remote Buttons Keypad ButtonsLamp on/off keypad only MenuSource keypad only or Computer and Video Remote only Volume keypad only StandbyUsing the On-Screen Menus Display Menu BrightnessContrast Color Reset AllTint SharpnessImage Menu VolumeAudio Menu Keystone computer source onlyAuto Image ResizeHorizontal position computer source only Manual Sync computer source onlyManual Tracking computer source only Vertical position computer source onlyStandby Time Controls MenuVideo Standard Rear ProjectionPlug and Play Default SourceAuto Source Select Display MessagesLanguage Menu Display Startup ScreenStatus Menu Software version Boot versionSource Startup screen versionUsing Kodak Image Manager Page Maintenance Troubleshooting Cleaning the LensReplacing the Projection Lamp UhjxodwlrqvSurmhfwruwrryhukhdw 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ Replacing the Batteries in the Remote Control Using the Security LockTroubleshooting Remote ControlSound Image Quality Settings work best if you select Lamp Image Source Specifications Appendix aOptics Portable and Laptop Activation Chart Appendix BAMS FN-F6 FN-F4 DEC FN-F3 FN-T NCR Key command Computer De-activate Activate port Port Key command Computer De-activate Activate port Port Page Using Video Mirroring with a PowerBook Computer Appendix CUsing SimulScan Appendix D Projected Image SizeImage Size, Width and Height for DP2900 maximum image size Image Size, Width and Height for DP2900 minimum image size Index Keypad Index User Guide Kodak DP2900 Digital Projector Warranty Warranty Time PeriodHOW to Obtain Service