Kodak DP2900 manual Lamp

Page 53

		Maintenance & Troubleshooting
Lamp

	Problem	Cause and Solution


	No light is coming from the	• Make sure that the power cord is
	lamp.	properly connected to a fully functional
		AC electric outlet. The Power light
		blinks when the power is connected but
		the projector is not turned on. The
		Power light is a steady green when the
		lamp is running.
		• Make sure that the power cord is
		properly connected to the projector.
		• Make sure that you have removed the
		lens cap on the projector lens at the front
		of the projector.
		• Make sure you have pressed the Power
		button and the Power light is a steady
		green.
		• Check the projector's lamp to make sure
		that it is securely connected to the
		projector.
		• Make sure that the lamp module door is
		fully closed.
		• Make sure that the cable connectors do
		not have any bent pins.
		• Replace the lamp.

	Lamp shuts off.	• A minor power surge may cause the
		lamp to shut off. Unplug the projector,
		wait at least a minute, then plug it back
		in.
		• Make sure the vents are not blocked.
		• Replace the lamp module.

	Lamp seems to be getting	The lamp begins to lose brightness when
	dimmer	it has been in use for a long time.
		Replace the lamp as described in
		“Replacing the Projection Lamp” on
		page 46.

53

Image 53

Contents User Guide Kodak DP2900 Digital Projector Page Safety Certifications Page Table of Contents Appendix a Appendix B Safety Definitions Safety Symbols Safety InstructionsSafety Issues Important Operating Considerations Battery Use Page Compatibility Image ResolutionIntroduction Unpacking the Projector Usage Guidelines Projector FeaturesFaxed Information Online ServicesIf You Need Assistance Telephone Customer Support HK/PRC Positioning the Projector Setting up the ProjectorConnecting a Computer Connecting the ProjectorDo you want to play your computer’s audio on the projector? To connect to a video source Connecting a Video SourceConnecting with an S-video cable Surmhfwru Starting the ProjectorTurning Off the Projector Page Basic Image Adjustment Using the ProjectorAdjusting the Projector Using the Remote Control User Guide Kodak DP2900 Digital Projector Keypad Buttons Using the Keypad and Remote ButtonsSource keypad only or Computer and Video Remote only Lamp on/off keypad onlyMenu Standby Volume keypad onlyUsing the On-Screen Menus Contrast Display MenuBrightness Tint Reset AllColor SharpnessAudio Menu VolumeImage Menu Keystone computer source onlyResize Auto ImageManual Tracking computer source only Manual Sync computer source onlyHorizontal position computer source only Vertical position computer source onlyVideo Standard Controls MenuStandby Time Rear ProjectionAuto Source Select Default SourcePlug and Play Display MessagesDisplay Startup Screen Language MenuStatus Menu Source Boot versionSoftware version Startup screen versionUsing Kodak Image Manager Page Cleaning the Lens Maintenance TroubleshootingUhjxodwlrqv Replacing the Projection LampSurmhfwruwrryhukhdw 3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ Using the Security Lock Replacing the Batteries in the Remote ControlSound TroubleshootingRemote Control Image Quality Settings work best if you select Lamp Image Source Appendix a SpecificationsOptics Appendix B Portable and Laptop Activation ChartAMS FN-F6 FN-F4 DEC FN-F3 FN-T NCR Key command Computer De-activate Activate port Port Key command Computer De-activate Activate port Port Page Appendix C Using Video Mirroring with a PowerBook ComputerUsing SimulScan Image Size, Width and Height for DP2900 maximum image size Appendix DProjected Image Size Image Size, Width and Height for DP2900 minimum image size Index Keypad Index User Guide Kodak DP2900 Digital Projector Warranty Time Period WarrantyHOW to Obtain Service