>AppleTalk On
>AppleTalk
?On
>IPP On
>IPP
?On
AppleTalk
This section explains the procedure for enabling AppleTalk.
1Enter the administrator ID and password. Then, if AppleTalk is set to Off, use U or V to select On.
2Press [OK]. A blinking question mark (?) appears.
3Press [OK] again.
4Press [MENU]. The display returns to Ready.
IPP
This section explains the procedure for enabling IPP.
1Enter the administrator ID and password. Then, if IPP is set to Off, use U or V to select On.
2Press [OK]. A blinking question mark (?) appears.
3Press [OK] again.
4Press [MENU]. The display returns to Ready.
Printing Operation |