Express Mode
In Express Mode, the installer automatically detects the printer when it is turned on. Use Express Mode for standard connection methods.
1In the installation method selection window, select Express Mode. The print system detection window appears and the installer detects the connected printers. If the installer does not detect a print system, check that the print system is connected via USB or a network and that it is turned on. Then return to the print system detection window.
Note While the information shown in Windows Vista and Windows XP installation dialog boxes differs slightly, the installation procedure is the same.
2Select the print system to be installed and click Next.
Note If the Found New Hardware Wizard appears, click Cancel. If a hardware installation warning message appear, click Continue.
3You can customize the print system name in the installation settings window. This will be the name displayed in the Printer window and in the printer lists displayed in applications. Specify whether to share the print system name or set the print system as an existing printer and then click Next.
IMPORTANT Step 3 only appears if the print system is connected via a network. It does not appear if the print system is connected via a USB.
4A window appears in which you can check the settings. Check the settings carefully and then click Install.
Note If the Windows security window appears, click Install this driver software.
5A message appears saying that the printer has been installed successfully. Click Exit to exit the printer installation wizard and return the
If the device setup dialog box appears after you click Exit, you can specify the settings for items such as optional features installed in the print system. You can also specify the device settings after you exit the installation. For details, refer to Device Settings in the printer driver operation manual on the
This completes the printer driver installation procedure. Follow the
Printing Operation |