|
|
|
|
Toner Color | Life of the Toner Container (Printable pages) |
|
|
Black | 12,000 images |
|
|
Cyan | 10,000 images |
|
|
Magenta | 10,000 images |
|
|
Yellow | 10,000 images |
|
|
Note The toner container packed with the new printer has to fill up the system when operating the first time. Therefore only 50% of the first toner kits can be used for printing. (For example: FS- C5200DN can print 3,500 monochrome images using the black starter toner container).
Toner Kits
For best results, we recommend that you only use genuine Kyocera Parts and Supplies.
The toner kits are supplied in 4 different colors: cyan, magenta, yellow and black.
A new toner kit for each color contains the following items:
•Toner Container
•Plastic waste bags for old toner container and old waste toner box
•Waste Toner Box
•Installation Guide
Note Do not remove the toner container from the carton until you are ready to install it in the printer.
Understanding Messages Requesting Toner Container Replacement
The printer displays messages for individual colors at two stages of toner usage. This message is automatically alternated with the other printer message (such as Ready):
•When the printer becomes low on toner, for example in the cyan container, the printer displays the message Toner low C as the first caution. Note the replacement is not always necessary at this stage.
•If you ignore the above message and continue printing, the printer displays the message Replace toner — just before the toner is used up. The toner container must be replaced immediately. Clean the separate charger wires, etc. After the cleaning is finished, however, the message does not automatically change to Ready. To restart printing, you must press [GO] and make the printer ready.
In either case, replace the toner container, refer to Toner Container Replacement on page
Maintenance |