Kyocera FS-C5300DN, FS-C5200DN, FS-C5100DN Storage Error Codes, Hard Disk Errors, Code Meaning

Message		Corrective Action
		• The ID or Password entered for the Job Accounting function is not correct. Check the ID or
	Wrong ID	Password.
		For more information, refer to Job Accounting (Job Accounting selection/setting) section of
		the Advanced Operation Guide.
		• The user ID entered for a private job, or a stored job is not correct. Check the user ID that
		you specified on the printer driver.
		The password does not match the password set. Enter the correct password. For more
	Wrong Password	information, refer to Job Accounting (Job Accounting selection/setting) section of the
		Advanced Operation Guide.

	Storage Error Codes
	Hard Disk Errors
Code	Meaning
01	Hard disk format error. If this error recurs even if the power has been turned
	off and then on, reformat the hard disk.
02	The disk system is not installed. Recheck the requirements for using the
	system and the devices.
04	There is no available hard disk space. Delete unnecessary files, etc., in order
	to free up space.
05	The specified file does not exist in the hard disk.
06	There is no memory available to the hard disk system. Increase the available
	memory.
10	Formatting is not possible because host data is being spooled on the hard
	disk. Wait until the hard disk is ready, and then format.
97	The number of permanent code jobs that can be stored reached the limit
	value, and no more can be saved. Either delete some unnecessary jobs, etc.,
	or increase the limit.
98	An unreadable page was found in a job (The job is damaged.).
99	A print job for the specified ID does not exist in the hard disk.

4-10 Troubleshooting