Kyocera FS-C5200DN, FS-C5300DN, FS-C5100DN manual Cancel, Starts

Message			Corrective Action
			Printing using the Job Box function failed because there was insufficient space available on
	Job not stored
	Press GO		the hard disk or RAM disk, or because the RAM disk was disabled when demounting the hard
			disk. To print an error report and return the printer to the print-ready status, press [GO].
			This message is displayed when printing was attempted, despite the Job Account function
	Job restricted
	Press GO		being on with Restriction applied as the job limit for each job account.
			To return the printer to the print-ready status, press [GO].
			For more information, refer to Job Accounting (Job Accounting selection/setting) section of
			the Advanced Operation Guide.
			Current print processing cannot continue because of occurrence of KPDL error which is
	KPDL error	##
	Press GO		categorized by ##. To print out an error report, display >>Error Report from the menu
			system, and select On. Press [GO] to resume printing. You can abandon printing by pressing
			[Cancel].
			If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of
			time.
			The paper cassette matching the paper size and paper type of the print job is empty. Load
	Load Cassette #
	(A4)/(PLAIN)		paper into the paper cassette as displayed in place of #. Press [GO] to resume printing.
			If you want to print from a different paper source, press U or V to display Use
			alternative? and you can change the source for paper feeding. After selecting a paper
			source and pressing [MENU], Paper Settings > appears. By pressing the U, the paper
			type settings menu appears. After setting the correct paper type, press [OK] and printing
			starts.
			There is no paper cassette installed in the printer that matches the paper size and paper type
	Load MP Tray
	(A4)/(PLAIN)		of the print job. Set paper in the MP tray. Press [GO] to resume printing. (Note that feeding
			the paper having a paper size which does not match the current paper size from the MP tray
			can cause paper jam.)
			If you want to print from a different paper source, press U or V to display Use
			alternative? and you can change the source for paper feeding. After selecting a paper
			source and pressing [MENU], Paper Settings > appears. By pressing the U, the paper
			type settings menu appears. After setting the correct paper type, press [OK] and printing
			starts.
			This message is displayed when Low was selected in Security Level.
	Low security

Memory overflow	The total amount of data received by the printer exceeds the printer’s internal memory.
Press GO	Try adding more memory. Press [GO] to resume printing. You can abandon printing by
	pressing [Cancel].
	If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of
	time.
	A memory card error has occurred. Look at the error code given in place of ## and refer to
MemoryCard err##
Press GO	Memory Card and USB Memory Errors on page 4-11. To return the printer to the print-ready
	status, press [GO].
	Multi copies cannot be printed because RAM disk is disabled or the hard disk is not installed.
No multi copies
Press GO	Try adding more memory or installing hard disk, and configuring the RAM disk settings.
	This message is displayed when the optional paper feeder PF-510 is not connected to a
No power supply
Cassette	power source and COATED (coated paper) is selected as the paper type setting. Connect it to
	a power source via the printer.
	Displayed when the installed toner is the original Kyocera product.
Original toner
installed

4-8 Troubleshooting