Kyocera copier manual Checking the total copy count and printing out a report

Page 62

Section 6 COPY DEFAULT SETTINGS

Checking the total copy count and printing out a report

It is possible to use the operation panel to check the total number of						Sample Total Count Report
copies made. It is also possible to print out that information in the
form of a report.
1	Press down on the Stop/Clear key for at least 3 seconds.
	The copy count will begin to be shown on the copy quantity/
	magnification display.

2 The copy count will be shown in three portions in the following order. (In this example, the total number of copies made is 1,234.)

(1)	(2)	(3)
NOTE

If you press the Start key while the total copy count is being shown, the Total Count Report will be printed out. If you are going to print out the Total Count Report, make sure that there is 8 1/2" × 11" (Letter) or A4 paper either loaded in a drawer or set on the multi-bypass tray.

3 Once the total copy count has been shown, the copier will return to a copy-ready state.

6-12

Image 62

Contents 1500 Page Maintenance and Operation Information Copy Default SettingsTroubleshooting IMPORTANT! Please Read FirstContents 200% Preset Zoom mode Image quality selectionEco-Copy mode See IiiAbout the International Energy Star Program Low Power ModeOff Mode Paper RecyclingSymbols Page IMPORTANT! Please Read First LabelInstallation Precautions Other precautionsPrecautions for USE Other precautions Safety switch Safety of laser beamMaintenance Cdrh ActPage Limited Warranty for NEW Copier Model Page Names of Parts Main BodyPaper stopper DrawerPaper width guides Stopper extension lockFace-up tray Power switchPower cord Document Processor connector Right cover anchor pinOperation panel Auto Drawer Switching function Auto Clear functionNames of Parts Loading paper into a drawer PreparationsLoading paper Preparations Preparations Selecting the paper size Metric Specification A4 A6R, and Folio Setting paper on the multi-bypass trayInch Specification Code number SizePreparations Selecting the paper size standard setting XXXSelecting the paper size temporary setting Thick Paper mode Attaching the face-up tray Basic copying procedure Basic OperationSetting an original Adjusting the copy exposureSetting the number of copies to be made Start copyingAt the end of copying 50% Zoom modeMaking enlarged and reduced copies Preset Zoom mode Low Power mode Off mode More about the Off modeBasic Operation Layout modes Metric specificationCopy Functions In-1When setting the originals on the platen Copy FunctionsWhen setting the originals in the Document Processor Press the 2in1/4in1 key until the 2in1 indicator lights Press the 2in1/4in1 key until the 4in1 indicator lights Selecting the borderline Selecting the order of 4-in-1 layout Code number Borderline typesCopy Functions Sort mode Original Copy Press the Sort key to light the Sort indicatorRegistering the program Using programmed settings to make copiesProgram function Default Description Available settings Reference Number Copy Default SettingsAvailable default items Copy Default Settings Non-Standard Size Paper Width and it Mode ON/OFF Copy Default Settings Accessing and changing the default settings Sample User Copy Setting List Copy Default Settings Copy Default Settings Copy Default Settings Copy Default Settings Checking the total copy count and printing out a report Acceptable originals Optional EquipmentDocument Processor Names of partsSetting originals in the Document Processor Optional EquipmentSetting originals on the platen Paper Feeder Additional MemoryIf one of the following indications is displayed TroubleshootingIndication Procedure Reference Troubleshooting Misfeed location indicators If paper jamsRemoval procedures Paper jam inside the copierPaper jam in a drawer Paper jam in the paper eject section Paper jam in the multi-bypass tray Original jam in the optional Document ProcessorTroubleshooting Trouble Checkpoint Procedure Reference If other trouble occursTroubleshooting Maintenance and Operation Information Cleaning the copierReplacing the toner container Maintenance and Operation Information Cleaning the charger and the registration roller Cleaner Home PositionClose the front cover Close the upper front cover Specifications Main BodyAdditional Memory option Document Processor optionPaper Feeder option Paper feed Environmental SpecificationsDuplex 2-sided copying Document Processor Optional equipmentAvailable options Additional Memory Paper Feeder Document ProcessorAppendix Functions and settings combination chart Function selected first Function selected secondIndex NumericsToner Coverage Report default setting Total copy count Memo Page Page 2003