Kyocera copier manual If paper jams, Misfeed location indicators

Page 69

Section 8 TROUBLESHOOTING

If paper jams

If a paper jam occurs, copying will stop. In this case, an indication about the jam will appear on the operation panel. Leave the power switch ON ( ) and refer to “Removal procedures” on page 8-4to remove the jammed paper.

Misfeed location indicators

(1)

(2)

(3)

(4)

(1)Lights when an original jams in the Document Processor.

(2)Lights when a paper jam has occurred either in the multi-bypass tray or inside the copier.

(3)Lights when a paper jam has occurred in the upper drawer.

(4)Lights when a paper jam has occurred in the Paper Feeder.

Cautions

WARNING

High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock.

CAUTION

The copier’s fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned.

*Do not reuse jammed paper.

*If paper is torn during removal, be sure to remove any loose scraps of paper from inside the copier. Failure to do so could cause another paper jam later.

*Once all jammed paper has been removed, warm-up will begin. The error indications will disappear as well and the copier will return to the same settings as prior to the paper jam.

8-3

Image 69

Contents 1500 Page Troubleshooting Copy Default SettingsMaintenance and Operation Information IMPORTANT! Please Read FirstContents Eco-Copy mode See Preset Zoom mode Image quality selection200% IiiOff Mode Low Power ModeAbout the International Energy Star Program Paper RecyclingSymbols Page Label IMPORTANT! Please Read FirstOther precautions Installation PrecautionsPrecautions for USE Other precautions Maintenance Safety of laser beamSafety switch Cdrh ActPage Limited Warranty for NEW Copier Model Page Main Body Names of PartsPaper width guides DrawerPaper stopper Stopper extension lockPower cord Document Processor connector Power switchFace-up tray Right cover anchor pinOperation panel Auto Clear function Auto Drawer Switching functionNames of Parts Preparations Loading paperLoading paper into a drawer Preparations Preparations Selecting the paper size Inch Specification Setting paper on the multi-bypass trayMetric Specification A4 A6R, and Folio Code number SizePreparations XXX Selecting the paper size standard settingSelecting the paper size temporary setting Thick Paper mode Attaching the face-up tray Basic Operation Basic copying procedureSetting the number of copies to be made Adjusting the copy exposureSetting an original Start copyingAt the end of copying Zoom mode Making enlarged and reduced copies50% Preset Zoom mode Low Power mode More about the Off mode Off modeBasic Operation Copy Functions Metric specificationLayout modes In-1Copy Functions When setting the originals on the platenWhen setting the originals in the Document Processor Press the 2in1/4in1 key until the 2in1 indicator lights Press the 2in1/4in1 key until the 4in1 indicator lights Selecting the borderline Code number Borderline types Selecting the order of 4-in-1 layoutCopy Functions Original Copy Press the Sort key to light the Sort indicator Sort modeUsing programmed settings to make copies Program functionRegistering the program Copy Default Settings Available default itemsDefault Description Available settings Reference Number Copy Default Settings Non-Standard Size Paper Width and it Mode ON/OFF Copy Default Settings Accessing and changing the default settings Sample User Copy Setting List Copy Default Settings Copy Default Settings Copy Default Settings Copy Default Settings Checking the total copy count and printing out a report Document Processor Optional EquipmentAcceptable originals Names of partsOptional Equipment Setting originals in the Document ProcessorSetting originals on the platen Additional Memory Paper FeederTroubleshooting Indication Procedure ReferenceIf one of the following indications is displayed Troubleshooting If paper jams Misfeed location indicatorsPaper jam inside the copier Removal proceduresPaper jam in a drawer Paper jam in the paper eject section Original jam in the optional Document Processor Paper jam in the multi-bypass trayTroubleshooting If other trouble occurs Trouble Checkpoint Procedure ReferenceTroubleshooting Cleaning the copier Maintenance and Operation InformationReplacing the toner container Maintenance and Operation Information Cleaner Home Position Cleaning the charger and the registration rollerClose the front cover Close the upper front cover Main Body SpecificationsDocument Processor option Paper Feeder optionAdditional Memory option Environmental Specifications Duplex 2-sided copyingPaper feed Available options Optional equipmentDocument Processor Additional Memory Paper Feeder Document ProcessorFunction selected first Function selected second Appendix Functions and settings combination chartNumerics IndexToner Coverage Report default setting Total copy count Memo Page Page 2003