Kyocera manual Removal procedures, Paper jam inside the copier

Page 70

Section 8 TROUBLESHOOTING

Removal procedures

Paper jam inside the copier

NOTE

If there are any finished copies on the copy storage table, remove them first before performing this procedure.

1 Open the upper front cover.

2 Open the front cover.

3 Take the Process Unit out of the copier.

4 If the leading edge of the jammed paper is visible, pull it out towards you.

If the paper is not visible at all, perform the “Paper jam in a drawer” procedure.

If the paper has been fed to the rear of the copier but the leading edge is not visible, perform the “Paper jam in the paper eject section” procedure.

5 Set the Process Unit into the copier by aligning the pins on both sides of the Process Unit with the guides inside the copier, and then slide the Process Unit all the way back into the copier until it stops.

6 Close the front cover.

7 Close the upper front cover.

8-4

Image 70

Contents 1500 Page Maintenance and Operation Information Copy Default SettingsTroubleshooting IMPORTANT! Please Read FirstContents 200% Preset Zoom mode Image quality selectionEco-Copy mode See IiiAbout the International Energy Star Program Low Power ModeOff Mode Paper RecyclingSymbols Page IMPORTANT! Please Read First LabelInstallation Precautions Other precautionsPrecautions for USE Other precautions Safety switch Safety of laser beamMaintenance Cdrh ActPage Limited Warranty for NEW Copier Model Page Names of Parts Main BodyPaper stopper DrawerPaper width guides Stopper extension lockFace-up tray Power switchPower cord Document Processor connector Right cover anchor pinOperation panel Auto Drawer Switching function Auto Clear functionNames of Parts Loading paper PreparationsLoading paper into a drawer Preparations Preparations Selecting the paper size Metric Specification A4 A6R, and Folio Setting paper on the multi-bypass trayInch Specification Code number SizePreparations Selecting the paper size standard setting XXXSelecting the paper size temporary setting Thick Paper mode Attaching the face-up tray Basic copying procedure Basic OperationSetting an original Adjusting the copy exposureSetting the number of copies to be made Start copyingAt the end of copying Making enlarged and reduced copies Zoom mode50% Preset Zoom mode Low Power mode Off mode More about the Off modeBasic Operation Layout modes Metric specificationCopy Functions In-1When setting the originals on the platen Copy FunctionsWhen setting the originals in the Document Processor Press the 2in1/4in1 key until the 2in1 indicator lights Press the 2in1/4in1 key until the 4in1 indicator lights Selecting the borderline Selecting the order of 4-in-1 layout Code number Borderline typesCopy Functions Sort mode Original Copy Press the Sort key to light the Sort indicatorProgram function Using programmed settings to make copiesRegistering the program Available default items Copy Default SettingsDefault Description Available settings Reference Number Copy Default Settings Non-Standard Size Paper Width and it Mode ON/OFF Copy Default Settings Accessing and changing the default settings Sample User Copy Setting List Copy Default Settings Copy Default Settings Copy Default Settings Copy Default Settings Checking the total copy count and printing out a report Acceptable originals Optional EquipmentDocument Processor Names of partsSetting originals in the Document Processor Optional EquipmentSetting originals on the platen Paper Feeder Additional MemoryIndication Procedure Reference TroubleshootingIf one of the following indications is displayed Troubleshooting Misfeed location indicators If paper jamsRemoval procedures Paper jam inside the copierPaper jam in a drawer Paper jam in the paper eject section Paper jam in the multi-bypass tray Original jam in the optional Document ProcessorTroubleshooting Trouble Checkpoint Procedure Reference If other trouble occursTroubleshooting Maintenance and Operation Information Cleaning the copierReplacing the toner container Maintenance and Operation Information Cleaning the charger and the registration roller Cleaner Home PositionClose the front cover Close the upper front cover Specifications Main BodyPaper Feeder option Document Processor optionAdditional Memory option Duplex 2-sided copying Environmental SpecificationsPaper feed Document Processor Optional equipmentAvailable options Additional Memory Paper Feeder Document ProcessorAppendix Functions and settings combination chart Function selected first Function selected secondIndex NumericsToner Coverage Report default setting Total copy count Memo Page Page 2003